SATCO Lighting S21319 5.5W CA1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.50

SATCO Lighting S21319 5.5W CA10 LED, Clear, Medium Base, 90 CRI, 4000K, 120V

(No reviews yet) Write a Review

Model: S21319
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21319 5.5W CA10 LED, Clear, Medium Base, 90 CRI, 4000K, 120V

5.5 Watt CA10 LED - Clear - Medium base - 90 CRI - 4000K - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.046A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
CA10
Lumens:
500L
Operating Frequency:
60Hz
Product Type:
Candle
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium
Base Material:
Glass / Nickel Plated Aluminum
Incandescent Equivalent:
60W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
5.5W
Product Material:
Glass / Nickel Plated Aluminum
Product Weight:
0.044 lb

Satco Lighting S21319 – Frequently Asked Questions

1) Can I use the S21319 LED candle bulb in an outdoor fixture or a damp bathroom?
Yes. The 5.5W CA10 filament lamp carries a wet location rating and is listed for indoor or outdoor use, so covered porch lanterns, post lights and bathroom fixtures are all in scope. Burning position is universal, so it can be mounted base up, base down or horizontal.
2) Is this Satco CA10 LED safe to install in a fully enclosed light fixture?
It is an enclosed rated lamp, so sealed jelly jars, closed glass lanterns and enclosed ceiling fixtures are acceptable. That matters because non-enclosed-rated LEDs overheat in those housings and fail early.
3) Will this LED candle bulb work on a dimmer?
Yes, the S21319 is a dimmable lamp. It is not a three-way bulb, so it will not step through levels in a three-way socket; control has to come from a dimmer on the circuit.
4) Is 4000K too cool for a chandelier, or should I pick a warmer candle bulb?
The S21319 is fixed at 4000K, a neutral white that reads crisp rather than cozy. It is not CCT selectable, so you cannot field-adjust it. For lobby chandeliers, corridor sconces and commercial spaces where you want white light, 4000K suits; for residential dining or hospitality warmth, choose a 2700K or 3000K CA10 instead. Color rendering is 90 CRI, so skin tones and finishes look accurate either way.
5) What incandescent bulb does the 5.5W S21319 replace, and how bright is it?
It replaces a 60 watt incandescent candle lamp, putting out 500 lumens on 5.5 watts at 120 volts. Draw is 0.046 amps at 60 Hz, so a large fixture or a long run of decorative sockets adds very little load.
6) Does the clear glass on this Satco filament bulb cause glare in an open fixture?
The lamp is clear glass with a visible LED filament, which is the look you want in exposed-socket fixtures where the bulb is part of the design. Light spreads 300 degrees, close to omnidirectional, so it fills a shade or a bare chandelier arm evenly. In a fixture where the bulb sits at eye level unshielded, the exposed filament is bright to look at; a frosted CA10 softens that.
7) How long will these last before my crew has to relamp?
Average rated life is 15,000 hours. On a 12-hour-a-day lobby or exterior schedule that is roughly three and a half years of service, which is what makes these worth standardizing on across a property instead of incandescent candle lamps.
8) Does the Satco S21319 meet California Title 24 requirements for a multifamily job?
Yes, it is listed as Title 24 compliant and FCC compliant. It is not DLC listed, so if a utility rebate program you are filing under requires a DLC qualified product, this lamp will not qualify for it.
9) What is the S21319 CA10 bulb made of, and how heavy is it?
Glass envelope with a nickel plated aluminum base, weighing 0.044 lb per lamp. Light enough that it puts no meaningful stress on a delicate chandelier arm or a swing-arm socket.
How fast can I get the Satco Lighting S21319 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21319 come with a warranty?
Absolutely. The Satco Lighting S21319 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21319?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21319 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.