SATCO Lighting S21340 2.8W T6 LED, Clear, Candelabra Base, 90 CRI, 2700K, 120V

Yes. The S21340 is a T6 LED lamp with a candelabra base, so it threads into standard candelabra sockets found on chandeliers, wall sconces, and decorative fixtures. It runs on 120 volt line voltage, no driver or transformer needed.

At 2.8 watts, the S21340 draws a fraction of the power of a traditional candelabra incandescent while producing light at 2700K, the warm white tone people expect from an incandescent chandelier lamp. For property managers swapping out a fixture full of small base lamps, the wattage drop is the whole point: same warm look, far less load per socket.

It is 2700K, which is the warm white most residential and hospitality fixtures are standardized on. If the rest of your chandeliers or sconces are running 2700K lamps, this matches. It will look noticeably yellower next to a 3000K or 4000K lamp, so don't mix them in the same room.

90 CRI means colors render close to how they look under an incandescent source. That matters in hotel lobbies, restaurants, retail displays, and residential dining areas where finishes, food, and skin tones have to look right. Many low cost candelabra LEDs sit around 80 CRI; the S21340 is specified at 90.

The S21340 is clear, so the filament style light source is visible through the glass. That is what you want in an open chandelier, a candle sconce, or any fixture where the lamp itself is part of the look. If the lamp sits behind a shade or diffuser, clear versus frosted makes little visual difference, but in exposed applications a clear lamp gives sparkle and a frosted one gives a softer, more even glow.

The manufacturer part number is S21340 from Satco Lighting. Specify that number when reordering to get the 2.8W T6, clear, candelabra base, 90 CRI, 2700K, 120V configuration. Clear is the only finish this lamp is built in.