You may also like
SATCO Lighting S21363 8W ST19 LED, Clear, Medium Base, 90 CRI, 2700K, 120V
8 Watt ST19 LED - Clear - Medium base - 90 CRI - 2700K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.067A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- ST19
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- ST22
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- Base Material:
- Glass / Nickel Plated Aluminum
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8W
- Product Material:
- Glass / Nickel Plated Aluminum
- Product Weight:
- 0.084 lb
Satco Lighting S21363 – Frequently Asked Questions
1) Will the Satco S21363 LED filament bulb work in an enclosed fixture?
Yes. The S21363 is an enclosed rated lamp, so it can go in a sealed or capped fixture without voiding the rating. It also carries a Wet location rating and is listed for both indoor and outdoor use, which covers porch lanterns, sealed vanity globes, and covered exterior fixtures.
2) Is this Satco 8W ST19 a true 60 watt replacement?
It is. The 8 watt draw puts out 800 lumens at 2700K, which Satco rates as a 60W incandescent equivalent. Same warm color as the old filament bulb, roughly one seventh the wattage.
3) Can I put the S21363 on a dimmer?
The S21363 is dimmable on 120V, 60Hz line voltage. It is not a three-way lamp, so it will not step through the levels in a three-way socket the way a 30/70/100 incandescent does. For a dimming circuit, note the current draw is only 0.067A per lamp, so a handful of these may fall under the minimum load some older dimmers need to run smoothly.
4) Will this bulb look right in an open cage or exposed-bulb fixture?
That is exactly what it is built for. The S21363 uses LED filament construction inside a clear ST19 envelope, so you see the lit filament strands rather than a frosted diffuser. The 300 degree beam spread throws light nearly all the way around, and burning position is universal so it can be mounted base up, base down, or horizontal without affecting life.
5) Is the color rendering good enough for a restaurant or hotel lobby?
The S21363 is a 90 CRI lamp at 2700K, which is the range hospitality specs usually call for when skin tones, wood finishes, and food presentation matter. Standard LED lamps often sit at 80 CRI; this one renders noticeably closer to incandescent.
6) Does the Satco S21363 change color temperature, or is it fixed at 2700K?
Fixed. It is not a CCT selectable lamp, so there is no switch on the base to move it to 3000K or 4000K. Every unit is 2700K warm white, which makes it straightforward if you are standardizing a whole building on one color and want every fixture to match.
7) Does this Satco LED bulb qualify for a DLC utility rebate?
No. The S21363 is not DLC approved, so it will not qualify under DesignLights Consortium based rebate programs. It is FCC compliant, and the lamp is noted as lawful for sale in California.
8) How long before I have to relamp these across a property?
Rated average life is 15,000 hours. Run roughly 12 hours a day on an exterior or corridor fixture, that is about three and a half years per lamp. Worth knowing for a property manager planning a bulk relamp cycle rather than chasing one-off failures.
How fast can I get the Satco Lighting S21363 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21363 come with a warranty?
Absolutely. The Satco Lighting S21363 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21363?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21363 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.