SATCO Lighting S21800 6W, A19 LED, 2700K, Candelabra Base, 220 degree Beam Angle, 120V
6 Watt - A19 LED - 2700K - Candelabra base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Lumens:
- 480L
- Dimmable:
- Yes-Dimmable
- Product Material:
- Plastic
- Product Weight:
- 0.05 lb
- CRI:
- 80+
Satco Lighting S21800 – Frequently Asked Questions
1) Will the Satco S21800 LED bulb fit a standard medium screw socket?
No. The S21800 is built on a candelabra base, which is the small screw base (E12) used in chandeliers, sconces and decorative fixtures, not the medium/standard base found in most table lamps and cans. It's an unusual pairing because the bulb itself is A19 shaped, the familiar household bulb profile, on the small base. If your socket is a standard medium screw base, this will not thread in.
2) Can the Satco S21800 be used on a dimmer in a chandelier?
Yes, the S21800 is a dimmable LED, so it can run on a dimmer circuit. For a multi-lamp chandelier, use the same lamp in every socket; mixing dimmable LEDs with other lamp types on one dimmer is where flicker and uneven dimming usually come from.
3) How bright is the 6W Satco S21800 candelabra A19 compared to an incandescent?
It puts out 480 lumens at 6 watts, which is in the range of a 40 watt incandescent. With a 220 degree beam angle it throws light nearly all the way around the bulb rather than in a cone, so it works in open chandeliers, sconces and ceiling fixtures where you want general spread rather than a spot.
4) Is 2700K the right color for matching existing bulbs in a hotel or apartment fixture?
2700K is warm white, the same soft yellow tone as a standard incandescent or halogen lamp, so it matches legacy lamps and other 2700K LEDs already in the building. It will read noticeably warmer than a 3000K or 4000K lamp, so don't mix them in the same room. Color rendering is 80+ CRI, which is the normal spec level for corridor, guest room and common area lighting.
5) Will this LED work on 120V line voltage without a driver or transformer?
Yes. The S21800 is a 120 volt lamp with integral driver electronics, so it screws straight into a standard line voltage candelabra socket. No external transformer is needed. It is not intended for 12V or 24V low voltage fixtures.
6) Is the Satco S21800 clear or frosted?
Frost. The A19 envelope is a frosted plastic finish, which diffuses the LED sources so you don't see hot spots through the glass. That makes it a better choice than a clear lamp in open shades and exposed sockets where the bulb is in the sight line, and it is the only finish offered in this lamp.
7) Is this bulb light enough for a fixture with delicate candelabra sockets?
Yes, each lamp weighs about 0.05 lb and the body is plastic rather than glass, so it puts very little load on the socket or on the arms of a chandelier. The plastic envelope also holds up better than glass in high-traffic multi-family and hospitality spaces where lamps get knocked.
How fast can I get the Satco Lighting S21800 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21800 come with a warranty?
Absolutely. The Satco Lighting S21800 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21800?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21800 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.