You may also like
SATCO Lighting S29830 6W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V
6 Watt - A19 LED - 2700K - Medium base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
Satco Lighting S29830 – Frequently Asked Questions
1) What color of light does the Satco S29830 put out, and will it match my existing incandescent bulbs?
2700K, which is warm white, the same color tone as a standard incandescent or halogen A19. If a property is swapping incandescents out one at a time, 2700K is the match that keeps the light in a room looking consistent. If the other fixtures are already running 3000K or 4000K LED, this will read noticeably warmer alongside them.
2) Is a 6W LED A19 bright enough to replace the bulbs I have now?
The S29830 draws 6 watts on 120V. LED A19 lamps in that wattage class are the common one-for-one stand-in for older low-wattage incandescent A19 bulbs in lamps, hallways, closets, and accent fixtures. For high-output areas where a 75W or 100W incandescent was in place, step up to a higher wattage LED A19 instead.
3) Does the Satco S29830 throw light in all directions or just downward?
It has a 220 degree beam angle, so light spreads well past straight down and out to the sides of the lamp. That suits open fixtures, table and floor lamps, and shaded fixtures where you want the shade lit. It is not a narrow spot, so do not specify it where a tight directional beam is needed.
4) Is the S29830 A19 LED a good bulb to standardize on across an apartment building or facility?
It works for that where the sockets are standard medium base and the fixtures run on 120V line voltage. Standardizing on one 6W 2700K A19 across units means one bulb on the maintenance cart for lamps, hall fixtures, vanities, and closets, and consistent warm color from unit to unit. Order it as Satco S29830 to keep the color temperature and wattage identical on every reorder.
5) Is the Satco S29830 clear or frosted?
Frost. The frosted A19 envelope diffuses the LED sources so you do not see hard hot spots through the glass, which is what you want in open shades, bare-socket fixtures, and anywhere the bulb is in a line of sight. If a decorative clear filament look is the goal, this is the wrong lamp.
6) What exactly do I order to get this Satco A19 LED, and is there more than one version?
The part number is Satco S29830, and it is a single configuration: 6W A19 LED, 2700K, medium base, 120V, frost finish. There is no second color temperature or base type under that number, so specifying S29830 gets one bulb and one bulb only.
How fast can I get the Satco Lighting S29830 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29830 come with a warranty?
Absolutely. The Satco Lighting S29830 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29830?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29830 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.