SATCO Lighting S29833 6W, A19 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.79

SATCO Lighting S29833 6W, A19 LED, 4000K, Medium Base, 220 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S29833
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S29833 6W, A19 LED, 4000K, Medium Base, 220 degree Beam Angle, 120V

6 Watt - A19 LED - 4000K - Medium base - 220 deg. Beam Angle - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.050A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S8480
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
Frost
Lensed:
Yes
Lumens:
480L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
6W
Product Weight:
0.06 lb

Satco Lighting S29833 – Frequently Asked Questions

1) Can the Satco S29833 A19 LED be shipped to or installed in California?
No. The S29833 is flagged Non-Compliant for California Title 20, so it isn't a lamp to spec into a California job. Satco lists S8480 as the Title 20 alternate substitute for that market.
2) Will a 6W A19 LED like the Satco S29833 be bright enough to replace a 40 watt incandescent?
Yes. At 6 watts it puts out 480 lumens and is rated as a 40W incandescent equivalent, so it drops into the same socket and gives comparable light at a fraction of the draw (0.050A at 120V).
3) Is the Satco S29833 A19 LED safe to use in a fully enclosed ceiling fixture?
Yes, it's an enclosed rated lamp, so closed globes, jelly jars and flush drum fixtures are fine. It also carries a damp location rating and can be burned in any position, base up, base down or horizontal.
4) Can I use this 6W A19 LED outdoors in a porch or covered entry fixture?
Only where it stays out of the weather. The S29833 is rated for damp locations and listed for indoor use, so a covered porch or breezeway fixture is within its rating, but an exposed wet location is not. For open, rain-exposed fixtures pick a wet-rated lamp.
5) Will the Satco S29833 dim on my existing wall dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. Keep in mind an old incandescent-style dimmer may need an LED-compatible replacement to run smoothly at low end, since a single 6W lamp draws only 0.050A and can fall below a legacy dimmer's minimum load.
6) Does this Satco A19 LED work in a 3-way lamp socket?
Not as a 3-way lamp. The S29833 is a single-output bulb with a standard medium screw base. In a 3-way socket it will light at one level only, on whichever contact the socket energizes. Order a 3-way rated A19 LED if you need the three-step switching.
7) What does 4000K look like, and will it match the bulbs already in my building?
4000K is a neutral, slightly cool white, cleaner than the warm yellow of 2700K and not as blue as 5000K daylight. It's a common choice for corridors, offices, laundry and back of house. It's a fixed color, not color selectable, so if your other fixtures are 2700K or 3000K this lamp will read noticeably cooler beside them. CRI is 80.
8) Will this bulb throw light sideways in an open table lamp or is it directional?
It spreads light over a 220 degree beam angle, so it lights well past straight down and works in open shades, table lamps and exposed sockets rather than acting like a spot. The frosted lens diffuses the LED sources so you don't see hot spots.
9) How long will a Satco S29833 last before a maintenance tech has to change it again?
Rated 25,000 hours. On a common-area fixture running roughly 12 hours a day that's about 5.7 years between changes, which is why property managers standardize on LED A19s for stairwells and hallways where the ladder work is the real cost.
10) Is the Satco S29833 DLC listed for utility rebates?
No. This A19 lamp is not DLC approved, so it won't qualify under rebate programs that require a DLC listing. It is FCC compliant.
How fast can I get the Satco Lighting S29833 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29833 come with a warranty?
Absolutely. The Satco Lighting S29833 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29833?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29833 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.