SATCO Lighting S21807 9.8W, A19 LED, 5000K, Candelabra Base, 220 degree Beam Angle, 120V

No. The S21807 is an A19-shape LED with a candelabra base, which is the small screw base (E12) used in chandeliers, sconces and appliance-style fixtures, not the medium base found in most household lamps. If your socket takes a normal household screw-in bulb, this one won't thread in without an adapter. Check the socket size first, because the A19 bulb shape here can be misleading.

5000K, which reads as a crisp daylight white with a slight blue cast. It's the coolest of the common residential temperatures, so it will look noticeably whiter than a 2700K or 3000K bulb beside it. For hallways, laundry, garages and task areas it works well; for a chandelier in a dining room where the rest of the lamps are warm white, it will stand out.

It draws 9.8 watts on 120 volt line voltage, so it wires into standard North American residential and commercial circuits with no transformer or driver in the fixture. For a property manager relamping a building, that 9.8W draw per socket is what you'd use to figure the load on a multi-lamp chandelier.

It's a single configuration, 9.8W, 5000K, frost, candelabra base, 120V, so every socket you put it in gets identical output and color. That makes it straightforward for MRO relamping where you want one part number on the shelf. The limit is the base: only fixtures with candelabra sockets take it, so medium-base fixtures in the same building need a different lamp.

Frost. The glass is diffused rather than clear, so you see a soft glowing envelope instead of the LED filament or diode array. In an open fixture where the lamp is exposed, frost cuts the glare and hot spots a clear bulb would show.