You may also like
SATCO Lighting S29839 9.8W, A19 LED, 5000K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - 5000K - Medium base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.082A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S8481
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.8W
- Product Material:
- Metal / Plastic
- Product Weight:
- 0.06 lb
Satco Lighting S29839 – Frequently Asked Questions
1) Can the Satco S29839 A19 LED be used in an enclosed fixture?
Yes. The S29839 is an enclosed rated lamp, so it can go in a closed globe, a flush-mount drum, or a sealed jelly-jar style fixture without voiding the rating. It also carries a damp location rating, which covers covered porches, bathrooms, and laundry rooms. It is not rated for wet locations.
2) Can I ship the Satco S29839 to a job in California?
No. The S29839 is flagged Non-Compliant for California, meaning it does not meet the state's Title 20 appliance efficiency requirements. Satco lists S8481 as the California Title 20 alternate substitute for this lamp, so that is the part to order for a California site.
3) Will the Satco S29839 LED bulb work on a dimmer?
The S29839 is dimmable on 120V/60Hz line voltage. Current draw is only 0.082A, so a legacy incandescent dimmer sized for a 60W lamp is carrying a tiny fraction of its load. On older dimmers that can mean flicker or a limited low end, which is a dimmer compatibility issue rather than a lamp fault. For large multi-fixture dimming jobs, an LED-rated dimmer is the safer spec.
4) Is 5000K too harsh for apartment common areas, or should I use a warmer A19 LED?
At 5000K this lamp reads as a crisp daylight white, which suits stairwells, parking garages, laundry rooms, utility spaces, and back-of-house corridors where you want visibility. For resident units, lobbies, and hospitality spaces, most property managers standardize on a warmer 2700K or 3000K A19 instead. The S29839 is a fixed color, not CCT selectable, so you cannot field-adjust it. CRI is 80, which is normal for general-purpose A19 LEDs.
5) Can the Satco S29839 be installed base-up in a ceiling fixture?
Yes. Burning position is universal, so it can run base-up, base-down, or horizontal. That covers recessed cans, ceiling-mount fixtures, table lamps, and sconces without derating. The frosted plastic lens spreads light over a 220 degree beam angle, so it fills a shade or diffuser rather than throwing a narrow spot.
6) Will the Satco S29839 work in a three-way lamp socket?
It will screw in, but it is not a three-way lamp. The S29839 is single-output, so in a three-way socket it will light at one level on the positions that energize it and stay dark on the others. For a three-way table lamp you need a lamp specifically built as three-way.
7) Does the Satco S29839 qualify for a utility rebate?
Not through DLC. The S29839 is not DLC approved, so it will not satisfy rebate programs that require a DesignLights Consortium listing. It is FCC compliant. If a rebate is driving the purchase, confirm the program's qualified products list before specifying.
8) How long does the Satco S29839 A19 LED last for a MRO relamp schedule?
Average rated life is 25,000 hours. On a common-area fixture burning roughly 12 hours a day that works out to about 5.7 years between relamps, which is why many MRO buyers group-relamp A19 sockets with LED rather than chasing incandescent failures. Construction is metal and plastic, and the lamp weighs 0.06 lb.
How fast can I get the Satco Lighting S29839 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29839 come with a warranty?
Absolutely. The Satco Lighting S29839 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29839?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29839 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.