You may also like
SATCO Lighting S39836 9.8W, A19 LED, Omni-directional, 3000K, Medium Base, 220 degree Beam Angle, 120V
Model: SATCO-S39836
SATCO Lighting S39836 9.8W, A19 LED, Omni-directional, 3000K, Medium Base, 220 degree Beam Angle, 120V9.8 Watt - A19 LED - Omni-directional - 3000K - Medium base - 220 deg. Beam Angle - 120 Volt
Satco Lighting
$3.74
SATCO Lighting S11407 9.8W, A19 LED, 3000K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - 3000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.082A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- White
- Lensed:
- Yes
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.8W
- Product Weight:
- 0.06 lb
- Product Material:
- Acrylic
Satco Lighting S11407 – Frequently Asked Questions
1) Can the Satco S11407 A19 LED be used on a dimmer switch?
No. The S11407 is a non-dimmable lamp. Put it on a dimmer circuit and you'll get flicker, buzz, or premature failure. If the fixture is on a dimmer, either swap the switch for a standard toggle or spec a dimmable A19 instead.
2) Will this Satco A19 LED work in an enclosed ceiling fixture or a closed globe?
Yes, it's an enclosed rated lamp, so a closed glass globe, drum fixture, or jelly jar is fine. It also carries a Damp location rating, which covers covered porches, bathrooms, and stairwells, but not direct exposure to rain or sprinkler spray.
3) Can I ship the Satco S11407 to a job in California?
No. This lamp is flagged Non-Compliant for California, so it does not meet the state's lamp requirements and should not be specified on California work. For those jobs pick an A19 LED that carries a California compliant designation.
4) Can I put this bulb in a three-way lamp socket?
It will light, but only at full output. The S11407 is not a three-way lamp, so the low and medium positions on a three-way turn knob won't step it down. For a bedside three-way fixture you need a lamp specifically listed as three-way.
5) Does this A19 LED throw light in all directions like an old bulb, or is it directional?
Close to omnidirectional. The beam spread is 220 degrees with a white lensed diffuser, so it fills a shade or globe the way an incandescent A19 did rather than firing light in one direction. It can also be burned in any position, base up, base down, or horizontal.
6) Is the Satco S11407 DLC listed for a utility rebate?
No, it's not DLC approved, so it won't qualify under programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference. If your rebate paperwork calls for a DLC or ENERGY STAR ID, this lamp won't carry it.
7) Is this Satco LED rated long enough for a rental turn or common area relamp?
It's rated at 10,000 average hours. Running roughly 12 hours a day in a lobby or hallway, that's a little over two years before you're back up the ladder. For always-on exterior-adjacent or 24/7 areas, a higher rated hour lamp makes more sense.
8) What does the Satco S11407 bulb look like once it's installed?
It has a white housing with a white lens, the same frosted look as a standard soft white A19, so it doesn't stand out in an open shade or exposed socket. The body is acrylic rather than glass, which holds up better to handling on a relamp cart.
How fast can I get the Satco Lighting S11407 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11407 come with a warranty?
Absolutely. The Satco Lighting S11407 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11407?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11407 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.