You may also like
SATCO Lighting S39836 9.8W, A19 LED, Omni-directional, 3000K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - Omni-directional - 3000K - Medium base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- CRI:
- 80+
- Lumens:
- 800L
- Product Weight:
- 0.06 lb
- Dimmable:
- Yes-Dimmable
- Product Material:
- Plastic
Satco Lighting S39836 – Frequently Asked Questions
1) Is the Satco S39836 A19 LED good for a lamp with an open shade, or does it throw light in one direction?
It is an omni-directional A19 with a 220 degree beam angle, so light spreads out and back around the lamp rather than firing forward in a spot pattern. That makes it right for table lamps, open shades, ceiling fans, and sconces where you want the light distributed. For downlight cans where you want the output aimed at the floor, a directional BR or PAR lamp is the better choice.
2) Will this Satco LED work in a 277V commercial fixture?
No. The S39836 is a 120 volt lamp. On a 277 volt circuit, which is common in commercial and industrial lighting branch circuits, it is the wrong lamp and will fail. For 277V applications use a line-voltage lamp rated for that input or a fixture with an integral multi-volt driver.
3) What color of light does the 3000K Satco A19 LED put out compared to a 2700K bulb?
The S39836 is 3000K, a soft warm white that reads slightly cleaner and brighter than the 2700K yellow of an old incandescent. If you are mixing it into a building where the other lamps are 2700K, you will see the difference side by side, so standardize a whole space on one color temperature rather than swapping one fixture at a time.
4) What wattage incandescent bulb does a 9.8W Satco A19 LED replace?
At 9.8 watts, the S39836 sits in the range property managers normally use to take out a 60 watt incandescent A19. It is the same A19 shape and medium base, so it fits the same fixtures and the same shade harps, and the draw per socket drops to roughly a sixth.
5) Can I use the Satco S39836 on a dimmer switch?
Treat it as non-dimming unless a dimming rating is confirmed for the lamp. Satco publishes dimmable A19 LEDs as a separate item class, and putting a non-dimming LED on a forward-phase wall dimmer causes flicker, buzz, and early failure. For dimmed rooms, order an A19 LED specifically marked dimmable and pair it with an LED-rated dimmer.
6) Is the Satco S39836 a single bulb or a multi-pack, and how do I order the right one?
It is ordered by the manufacturer part number S39836, a single A19 configuration with a white finish. That one MPN covers the lamp, so for a building-wide relamp you simply order the quantity you need against S39836 and every socket gets the same 3000K output.
How fast can I get the Satco Lighting S39836 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S39836 come with a warranty?
Absolutely. The Satco Lighting S39836 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S39836?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S39836 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.