You may also like
SATCO Lighting S11406 9.8W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - 2700K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.082A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- White
- Lensed:
- Yes
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.8W
- Product Material:
- Acrylic
- Product Weight:
- 0.06 lb
Satco Lighting S11406 – Frequently Asked Questions
1) Can the Satco S11406 A19 LED bulb be used on a dimmer switch?
No. The S11406 is a non-dimmable lamp. Put it on a dimmer circuit and you can expect flicker, buzz, or premature failure. If the fixture is on a dimmer, either swap the switch for a standard toggle or spec a dimmable A19 instead. It also is not a three-way lamp, so it won't step through levels in a 3-way socket.
2) Is this Satco 9.8W A19 LED safe to install in a fully enclosed ceiling fixture?
Yes, it's an enclosed rated lamp, so a closed-globe ceiling fixture, a jelly jar, or a flush mount with a solid shade is fine. Burning position is universal, so base-up, base-down, or horizontal all work. That matters for corridor drum fixtures and closet globes where a non-enclosed-rated LED cooks itself early.
3) Can I put this LED bulb in an outdoor porch light or a bathroom over a shower?
It carries a damp location rating. That covers a covered porch, a soffit can, a bathroom, or a laundry room where the lamp sees humidity but not direct water. It is not wet-rated, so keep it out of open-weather fixtures, unshielded exterior wall packs exposed to rain, and anything in a shower spray zone.
4) Can I sell or install the Satco S11406 in California?
No. This lamp is flagged non-compliant for California, so it should not be specified for jobs in that state. For CA properties, pick an A19 LED that carries the state compliance marking.
5) Does this bulb throw light sideways, or only straight down like a lot of LEDs?
Beam spread is 220 degrees, so the light wraps well past horizontal. That is what you want in a table lamp, a wall sconce, or an open-bottom pendant where a narrow LED leaves the shade dark. The white lens diffuses it rather than showing hot spots.
6) How does this bulb hold up for a property manager relamping a whole building?
Rated life is 10,000 hours, which is on the shorter side for LED, so it suits moderate-use areas like apartment interiors, closets, and guest rooms more than a 24/7 corridor. It draws 0.082 amps at 120V, 60Hz, so a 15A branch circuit carries a very large number of them and load is not the constraint when you standardize a floor on it.
7) Will this Satco A19 work on 277 volt or on a low voltage system?
No. It's a 120 volt, 60Hz lamp only. For 277V circuits, common in commercial corridors and garages, you need a lamp rated for that line voltage. Don't use it on 12V or 24V systems either.
8) Does the Satco S11406 qualify for a DLC utility rebate?
No, it is not DLC approved, so it won't qualify under DesignLights Consortium rebate programs. It is FCC compliant, so radio interference in offices and multi-family units is addressed.
9) Can I change the color temperature on this bulb to match 3000K fixtures nearby?
No, it's a fixed 2700K lamp with no CCT selection switch. If you're relamping a space that's already on 3000K or 4000K, order that temperature separately rather than mixing, because 2700K next to 3000K reads noticeably yellow on a wall wash.
How fast can I get the Satco Lighting S11406 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11406 come with a warranty?
Absolutely. The Satco Lighting S11406 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11406?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11406 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.