You may also like
SATCO Lighting S11409 9.8W, A19 LED, 5000K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - 5000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.082A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- White
- Lensed:
- Yes
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.8W
- Product Weight:
- 0.06 lb
- Product Material:
- Acrylic
Satco Lighting S11409 – Frequently Asked Questions
1) Can the Satco S11409 A19 LED be used on a dimmer switch?
No. The S11409 is a non-dimmable lamp. Put it on a dimmer circuit and you risk flicker, buzz, or early failure. If the fixture is on a dimmer, either swap the control for a standard toggle switch or spec a dimmable A19 instead.
2) Will the Satco S11409 work in an enclosed ceiling fixture or a closed glass globe?
Yes. The 9.8W A19 is an enclosed rated lamp, so it can go in a closed globe, flush-mount drum, or jelly jar without voiding its rating. It also carries a Damp location rating, which covers covered porches and bathrooms, but not direct exposure to rain. Burning position is universal, so base-up, base-down, or horizontal all work.
3) Can I ship or install Satco S11409 bulbs in California?
No. The S11409 is flagged Non-Compliant for California, so it should not be specified for jobs or properties in that state. Use a California-compliant A19 LED for those openings.
4) Will 5000K match the bulbs already in the rest of my building?
Only if those existing lamps are also 5000K. The S11409 is a fixed 5000K daylight lamp with no colour-select switch, so it will read noticeably bluer next to 2700K or 3000K lamps in the same room or corridor. For property managers standardizing a fleet, 5000K suits garages, laundry rooms, stairwells, and back-of-house; for apartment living areas and lobbies most portfolios run warmer.
5) Can I use the Satco S11409 in a three-way lamp socket?
Not as a three-way lamp. The S11409 is not a three-way bulb, so in a three-way socket it will light at a single output level regardless of switch position, and some positions may leave it off. For a floor or table lamp where the tenant expects three brightness steps, order a three-way rated A19 instead.
6) Is the beam from this 220 degree A19 LED wide enough for a table lamp or an open shade?
Yes. At a 220 degree beam spread with a white lensed acrylic diffuser, the 9.8W A19 throws light nearly all the way around rather than straight down, which is what you want in table lamps, open shades, bare keyless sockets, and ceiling fixtures. For a tight downward pool of light on a counter or display, a BR or PAR reflector lamp is the better choice.
7) Does the Satco S11409 qualify for a DLC utility rebate?
No. The S11409 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference.
8) What is the rated life and current draw on the Satco S11409, for load and relamping planning?
Rated average life is 10,000 hours. Current draw is 0.082A at 120V, 60Hz, so a 15A branch circuit has plenty of headroom even with a long run of these in a corridor or stairwell. CRI is 80, which is standard for general-purpose and MRO lighting but below what you would spec for colour-critical retail or clinical work.
How fast can I get the Satco Lighting S11409 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11409 come with a warranty?
Absolutely. The Satco Lighting S11409 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11409?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11409 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.