You may also like
SATCO Lighting S29837 9.8W, A19 LED, 3500K, Medium Base, 220 degree Beam Angle, 120V
9.8 Watt - A19 LED - 3500K - Medium base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.082A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 3500K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.8W
- Product Material:
- Metal / Plastic
- Product Weight:
- 0.06 lb
Satco Lighting S29837 – Frequently Asked Questions
1) Can the Satco S29837 A19 LED be used in an enclosed ceiling fixture or a closed globe?
Yes. The S29837 is an enclosed rated lamp, so it can go in a closed globe, a drum fixture, or a jelly jar without the heat trapping issue that kills non-rated LEDs early. It also carries a damp location rating, which covers a covered porch ceiling, a bathroom, or a laundry room, but it is an indoor lamp and should not go anywhere exposed to direct water.
2) Can I use the Satco S29837 in a 3-way lamp socket?
No. The S29837 is not a three-way lamp. Screwed into a 3-way socket it will light at full output on one or more of the switch positions and stay dark on others, which is not what a tenant expects. For a 3-way table lamp, order a bulb specifically listed as three-way.
3) Is the Satco S29837 legal to sell or install in California?
No. The S29837 is flagged non-compliant for California, so it should not be specified for a job in that state. For California work you need a lamp that meets the state's quality LED lamp requirements.
4) What does 3500K look like compared to the 2700K bulbs already in my building?
3500K is a neutral white, noticeably cooler and cleaner than the warm yellow of a 2700K incandescent-style lamp, but not as blue as 4000K or 5000K. It is a common choice for corridors, offices, lobbies, and back-of-house areas. If your existing lamps are 2700K, mixing in 3500K in the same room will read as a visible color mismatch, so change the whole space at once. This lamp is fixed at 3500K, it is not CCT selectable.
5) Does this 9.8W LED throw light in all directions like the incandescent it replaces?
Close to it. The beam spread is 220 degrees with a frosted plastic lens, so light wraps well past the horizontal and diffuses evenly, which is what you want in a table lamp, a bare-socket keyless fixture, or an open shade. It is not a directional lamp, so for downlight cans or track you want a BR or PAR reflector instead. Burning position is universal, so base up, base down, or horizontal all work.
6) Is 80 CRI good enough for apartment corridors and offices?
For corridors, stairwells, storage, offices, and most multi-family common areas, 80 CRI is the normal spec and renders colors acceptably. Where color judgment matters, such as retail display, paint matching, or medical exam areas, look for a 90 CRI lamp instead. The S29837 is 80 CRI at 3500K.
7) How long does the Satco S29837 last before it needs relamping?
Average rated life is 25,000 hours. In a corridor or common area running roughly 12 hours a day, that works out to several years between relamps, which is the main reason property managers move off incandescent A19s in hard-to-reach fixtures.
8) Will this LED bulb cause interference with radios or building electronics?
The S29837 is FCC compliant, so its LED driver meets the federal limits on conducted and radiated emissions. That matters in offices and healthcare spaces where cheap unbranded LED lamps have been known to raise noise on AM radio and nearby electronics.
How fast can I get the Satco Lighting S29837 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29837 come with a warranty?
Absolutely. The Satco Lighting S29837 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29837?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29837 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.