SATCO Lighting S22216 11.5W PAR38 LED, 90 CRI, 3000K, 40 degree Beam Angle, Medium Base, 120V

It is a dimmable lamp, rated 1000 lumens at 11.5 watts. Pair it with an LED-compatible dimmer; older incandescent-rated dimmers can flicker or buzz at low output with an 11.5 watt load.

The S22216 runs 3000K, a warm white that reads slightly warmer than neutral 3500K and noticeably cooler than 2700K incandescent-look lamps. Color rendering is 90+ CRI, so skin tones, wood, and merchandise colors hold up. If your other fixtures are 2700K the difference will be visible side by side; standardize the whole room on one color temperature.

At 1000 lumens, the S22216 covers the output range of a 75 watt halogen PAR38 while drawing 11.5 watts. The 40 degree beam gives a flood spread rather than a tight spot, so it is a like-for-like swap for a 75W halogen flood in a can or track head.

Forty degrees is a flood beam. It is the right choice for general downlighting, washing a wall or shelving, and spacing cans across a ceiling without scalloping. If you need to pick out a single piece of merchandise, artwork, or a sign, go to a narrower spot or narrow flood PAR38 instead; a 40 degree beam will spill well past the target.

The S22216 is a single configuration: clear lens, 3000K, 40 degree flood, 11.5 watts, medium base. There is one orderable version, so no finish or lens choice to specify on the order. A different color temperature or beam spread means a different Satco part number.

Each lamp weighs 0.29 lb, well under a glass halogen PAR38, so it is no load concern for track heads, gimbal rings, or lightweight pendant sockets. The aluminum and plastic construction is also less prone to shatter than a glass PAR in a high-traffic or sports area.