You may also like
SATCO Lighting S22243 20.5W PAR30 High Lumen LED, Long Neck, 5000K, Medium Base, 120V
20.5 Watt PAR30 High Lumen LED - Long Neck - 5000K - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.171A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Gray
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30LN
- Lens Finish:
- Silver
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 1800L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 100W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 20.5W
- Product Material:
- Aluminum / Plastic
- Product Weight:
- 0.6 lb
Satco Lighting S22243 – Frequently Asked Questions
1) Can I use this PAR30 LED in a fully enclosed fixture or a sealed outdoor can?
Yes. The S22243 is an enclosed rated lamp, so it can run in a sealed or gasketed fixture where heat builds up and most LED lamps are not permitted. It is also wet location rated and listed for indoor or outdoor use, which covers soffit cans, canopies, and exterior floods exposed to rain. Burning position is universal, so base up, base down, or horizontal all work.
2) Will 5000K match the other bulbs already in my building?
Only if your existing lamps are also 5000K. The S22243 is fixed 5000K daylight, and it is not a CCT selectable lamp, so there is no field switch to drop it to 3000K or 4000K. Mixing it into a run of warm white cans will be obvious from the floor. For fleet standardization, pick one temperature across the facility and order it throughout.
3) Is the long neck PAR30 the right choice, or do I need a short neck?
The S22243 is the PAR30LN (long neck) version. Long neck lamps are meant for recessed cans and track heads where the socket sits deeper, so the lens finishes flush with the trim instead of recessed up inside it. If your existing lamp is a short neck PAR30, the long neck will sit proud of the trim or may not seat in the housing at all. Match the neck length to what you removed.
4) Will this 20.5W PAR30 LED dim without flicker on my existing wall dimmers?
The lamp is dimmable at 120V, 60Hz. Current draw is only 0.171 amps, so an older incandescent-style dimmer with a high minimum load may not hold it steady if just one or two lamps are on the circuit. For retrofit work on legacy dimmers, group enough lamps on the circuit to clear the dimmer's minimum load, or swap to an LED-rated dimmer.
5) Is the color rendering good enough for retail or healthcare spaces?
CRI is 90, which is the threshold most retail, healthcare, and hospitality specs call out for accurate color on merchandise, skin tone, and finishes. Paired with the 5000K daylight temperature, it reads crisp and neutral rather than warm.
6) Can this lamp be used on a three-way socket or fixture?
No. The S22243 is not a three-way lamp. In a three-way socket it will operate at a single output level only, so if the fixture needs stepped switching you need a lamp built for three-way operation.
7) Does this Satco PAR30 qualify for DLC utility rebates?
No. The S22243 is not DLC approved, so it will not qualify for utility incentive programs that require a DesignLights Consortium listing. It is FCC compliant and marked lawful for sale in California.
8) What is the lamp made of, and what does the lens look like once it is installed?
Body is aluminum and plastic with a gray housing, and the lens is polystyrene plastic with a silver finish. Lensed construction means a smooth optical face rather than exposed diodes, which keeps glare down when the lamp sits near the plane of the trim. Lamp weight is 0.6 lb, well within the range of standard track heads and can sockets.
How fast can I get the Satco Lighting S22243 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S22243 come with a warranty?
Absolutely. The Satco Lighting S22243 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S22243?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S22243 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.