SATCO Lighting S22253 33W PAR38 High Lumen LED, 5000K, Medium Base, 120V

5000K is a daylight white, the coolest of the common commercial color temperatures. It reads crisp and blue-white, which suits parking garages, warehouses, security lighting, grocery and task areas. For a hotel lobby, restaurant, or apartment living space, most specs call for 2700K or 3000K instead. The S22253 is 5000K only, so if you are matching warmer existing lamps in the same ceiling, this is the wrong color for that run.

3000 lumens at 33 watts. That output puts it well above a typical 90W halogen PAR38 and in the range of a 250W incandescent flood, so it is used where a single lamp has to cover high ceilings or long throws. If 3000 lumens is more than the space needs, step down to a lower-wattage PAR38 LED rather than dimming this one all day.

90+ CRI means colors render close to natural daylight, which matters where people judge product or finish color: retail merchandise, paint and fabric showrooms, galleries, medical exam areas, and food display. Standard LED lamps typically sit around 80 CRI, so this lamp is the one to specify when a drawing calls out 90 CRI minimum.

The S22253 is grouped as an indoor lighting lamp and built from aluminum and plastic. Treat it as an indoor lamp for recessed cans, track, and interior high-bay style fixtures. For soffits, canopies, and exterior floodlight housings, specify a PAR38 LED that carries a wet-location rating.

The S22253 is a single configuration: 33W, 5000K, medium base, 120V, silver finish. There are no other color temperature or base options under this part number, so standardizing a facility on it means every fixture it goes in needs to be a 120V medium-base PAR38 socket wanting daylight white light. Order by part number S22253 to keep a fleet of openings consistent.

The lamp weighs 0.89 lb, which is heavier than a plastic-bodied low-wattage LED because of its aluminum heat sink. In most recessed cans that is a non-issue, but on tired track heads or spring-tension gimbals the extra mass can make an aimed head drift over time. Check that the socket and yoke hold position when you aim it.