SATCO Lighting S22703 2W C11 LED, Satin Spun, Clear, Medium Base, 2700K, 120 Lumens, 120V, Carded

It puts out 120 lumens at 2 watts. That is decorative-level light, in the range of a 15 watt incandescent candelabra-style lamp, so use it where the lamp is meant to be seen rather than to light a room, chandeliers, sconces, night lights, display fixtures.

2700K, which is warm white, the same yellow-toned color as a standard incandescent lamp. If the rest of the fixture or the rest of the building is on 2700K lamps, it will blend. Mixing it with 3000K or 4000K lamps in the same fixture will read as an obvious color difference.

The glass is clear with a satin spun finish, so the filament detail stays visible. That is the look you want in exposed decorative fixtures, open chandeliers and vintage-style sconces. If you need diffused light with no visible source, a frosted or white lamp is the better choice.

The lamp is specified as a 2 watt, 120 volt, 2700K C11 LED with a medium base and 120 lumen output. Dimming behavior is not part of that specification, so do not assume it will dim, and if the circuit is on a dimmer, select a lamp specifically marked dimmable. Most standard dimmers also have a minimum load well above 2 watts, which is a common cause of flicker on very low wattage lamps.

It is carded, meaning it ships in blister-card retail packaging rather than a bulk carton. That suits counter sale and single-unit handouts to maintenance staff; for high-volume relamping across a property, carded packaging means more waste to handle at the job.

The manufacturer part number is S22703 from Satco Lighting. Ask for it by that number when you are matching lamps already installed in a fixture, since Satco's C11 line covers several wattages and color temperatures and only S22703 is the 2W, 2700K, clear satin spun, medium base version.