SATCO Lighting S23140 45/36/27...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$63.95
Satco Lighting SAT-S23140 45/36/27 Wattage Selectable - LED HID Replacement - CCT Selectable - Type B - Ballast Bypass - Medium base - 100-277 Volt - ColorQuick Technology - PowerQuick Technology

SATCO Lighting S23140 45/36/27 Wattage Selectable, LED HID Replacement, CCT Selectable, Type B, Ballast Bypass, Medium Base, 100-277V

(No reviews yet) Write a Review

Model: S23140
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$63.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S23140 45/36/27 Wattage Selectable, LED HID Replacement, CCT Selectable, Type B, Ballast Bypass, Medium Base, 100-277V

45/36/27 Wattage Selectable - LED HID Replacement - CCT Selectable - Type B - Ballast Bypass - Medium base - 100-277 Volt - ColorQuick Technology - PowerQuick Technology

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.450-0.162/0.360-0.130/0.270-0.097A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
Yes
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Both
FCC Compliant:
Yes
Housing Color:
Dark Gray
Lamp Filament:
LED
Lamp Shape:
Corncob
Lens Material:
Plastic
Lumens:
6300L/5040L/3780L
Operating Frequency:
50-60Hz
Product Type:
Corncob
Three-Way:
Yes
Warranty:
5 Year Limited - Hi-Pro
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium
Base Material:
Plastic (PS)
Incandescent Equivalent:
125W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
100V-277V
Beam Spread Angle:
300
Light Temperature:
3000K/4000K/5000K
Product Category:
Light Bulbs
Product Wattage:
45W/36W/27W
Product Weight:
1.63 lb
Product Material:
Plastic (PS)

Satco Lighting S23140 – Frequently Asked Questions

1) Does the Satco S23140 corncob LED need the existing HID ballast removed?
Yes. The S23140 is a Type B ballast bypass lamp, so it runs on line voltage direct to the medium base socket. The existing magnetic or electronic HID ballast has to be removed or bypassed and the socket wired straight to the incoming line. Leaving the ballast in circuit will damage the lamp.
2) Will a 45W selectable corncob LED work on both 120V and 277V circuits?
It will. The S23140 accepts 100V to 277V at 50-60Hz, so the same lamp covers 120V residential and common areas as well as 208V, 240V and 277V commercial lighting circuits. That is what makes it practical to stock one part number across a mixed portfolio of buildings.
3) How do you set the wattage and color temperature on the Satco S23140?
Both are selectable on the lamp itself before install. Wattage steps between 45W, 36W and 27W, delivering 6300, 5040 and 3780 lumens respectively, and color temperature steps between 3000K, 4000K and 5000K. Pick the setting at the fixture, then log it so the rest of the building gets set the same way.
4) Can this corncob LED go in an enclosed fixture like a wall pack or acorn globe?
Yes. The enclosure rating on the S23140 covers both open and enclosed fixtures, and burning position is universal, so it can be mounted base up, base down or horizontal. It is rated for damp locations and listed for indoor or outdoor use, which covers a covered wall pack or a post top globe, but not direct wet exposure.
5) What HID lamp does the Satco S23140 replace, and how much current does it draw?
It is sold as an LED HID replacement with a 125W incandescent equivalence, at up to 6300 lumens on the 45W setting. Draw is 0.450-0.162A at 45W, 0.360-0.130A at 36W and 0.270-0.097A at 27W across the 100-277V range, the lower figure being the high-voltage end. Those numbers are what you use to recount lamps per branch circuit after a retrofit.
6) Is the S23140 corncob lamp dimmable?
Yes, the S23140 is dimmable and is also listed as three-way capable. Because it is a ballast bypass lamp on line voltage, any dimming has to be done on the line side of the socket, not through an HID ballast.
7) Will a corncob LED throw light the same way as the HID lamp it replaces?
Close, but not identical. The S23140 puts out a 300 degree beam spread from its corncob array, so it is near-omnidirectional and suits open reflectors, wall packs and post tops. The socket end is the dead zone, so in a fixture that relies on light going straight back into a deep reflector behind the base you will lose some of it.
8) Does this Satco LED lamp qualify for California Title 24 or DLC rebates?
The S23140 is Title 24 compliant and FCC compliant, so it works for California code jobs. It is not DLC listed, which matters if the utility rebate program you are filing under requires a DLC qualified product ID.
9) What is the rated life and color quality of the Satco S23140 corncob LED?
Rated at 50,000 average hours with 80 CRI. For parking garages, stairwells and exterior areas running long hours, that life rating is the argument for the retrofit; 80 CRI is standard general-purpose color rendering, fine for circulation and site lighting but on the low side for retail merchandising.
10) What is the Satco S23140 lamp body made of?
The base is PS plastic and the lens is plastic, with a dark gray housing on the heat sink section. No glass envelope, so there is nothing to shatter in a loading dock or gymnasium application, though the plastic base is why the damp location limit matters, keep it out of direct spray.
How fast can I get the Satco Lighting S23140 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S23140 come with a warranty?
Absolutely. The Satco Lighting S23140 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S23140?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S23140 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!