SATCO Lighting S28486 16.5W, A19 LED, 90CRI, 4000K, Medium Base, 220 degree Beam Angle, 120V, 1600 Lumens, CEC

Yes. The S28486 is an enclosed rated lamp, so it can go in closed globes, jelly jars, and sealed ceiling fixtures without voiding the rating. It is also damp location rated and listed for indoor use, which covers bathrooms, covered corridors, and laundry rooms. Burning position is universal, so base up, base down, or horizontal all work.

The S28486 is a dimmable 120V lamp running at 60Hz. It pulls 0.138 amps, so on a legacy incandescent dimmer sized for a 100W load the lamp draws a fraction of the minimum load those dimmers expect, which is the usual cause of flicker or drop-out at the low end. For dimmed applications, pair it with an LED-rated dimmer. If the circuit is a three-way lamp socket, this bulb is not a three-way lamp and will run at full output only.

Yes, the S28486 is California T24 listed, so it satisfies the CEC listing requirement for jobs in California. Part of what gets it there is the 90+ CRI rating. It is not DLC listed, so if your utility rebate program requires DLC qualification, this lamp will not qualify for it.

A 90+ CRI rating means colors render close to what they look like under daylight, which matters in retail display, healthcare exam areas, hospitality guest rooms, and anywhere residents complain that LED lighting makes everything look washed out. At 4000K the light is a neutral white, between warm residential 2700K and the bluish 5000K often used in shops and garages. Color temperature is fixed on the S28486, it is not a CCT selectable lamp, so order the color you want.

Yes. The 220 degree beam spread throws light well past the horizontal, so the S28486 lights downward and sideways rather than only forward, which is what you want in a table lamp, a wall sconce, an open shade, or a bare-socket closet fixture. The lens is white plastic (PS) with a white housing, so the output is diffuse rather than a hard point source. If you need a controlled downward cone in a recessed can, a BR or PAR reflector lamp is the better choice.

Order it as Satco Lighting S28486. That designation covers the 16.5W A19 LED at 4000K, 1600 lumens, 90+ CRI, medium base, 120V, in white. Satco's adjacent A19 numbers differ by color temperature and CRI, so the S28486 number is what pins down the 4000K, 90+ CRI version. Country of origin is China. Lamp weight is 0.16 lb.