SATCO Lighting S28693 12W T5 L...
In stock
$12.50

SATCO Lighting S28693 12W T5 LED, Miniature bi-pin Base, 3500K, 50000 Avg Rated Hours, 1400 Lumens, Type B, Ballast Bypass

(No reviews yet) Write a Review

Model: S28693
Selected Finish is

In stock

$12.50
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S28693 12W T5 LED, Miniature bi-pin Base, 3500K, 50000 Avg Rated Hours, 1400 Lumens, Type B, Ballast Bypass

12 Watt T5 LED - Miniature bi-pin base - 3500K - 50000 Average rated hours - 1400 Lumens - 120-277 Volt - Type B - Ballast Bypass - Single or Double Ended Wiring

Manufacturer Resources

Product Specs

Amps:
0.100-0.043A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T5
Lens Finish:
Frost
Lens Material:
Glass
Lensed:
Yes
Lumens:
1400L
Operating Frequency:
50/60Hz
Product Type:
Tube
Three-Way:
No
Warranty:
5 Year Limited - T5 LED Bulbs - Ballast Bypass
Product Group:
Lighting
Product Subgroup:
Lamps & Bulbs
Bulb Base:
Miniature Bi Pin
Base Material:
Glass
Incandescent Equivalent:
50W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
240
Light Temperature:
3500K
Product Category:
Light Bulbs
Product Wattage:
12W
Department:
Electrical

Satco Lighting S28693 – Frequently Asked Questions

1) Can I install the Satco S28693 T5 LED without rewiring the fixture, or does the ballast have to come out?
The ballast has to come out. The S28693 is a Type B ballast bypass lamp, so it runs on line voltage direct to the sockets and will not work through an existing fluorescent ballast. The fixture gets rewired to feed 120 to 277 volts to the tombstones, and the lamp accepts either single ended or double ended wiring, so it suits most retrofit layouts. Plan on a licensed electrician doing the conversion.
2) Will a 12W LED T5 replacement be as bright as the fluorescent tube I'm pulling out?
The S28693 puts out 1400 lumens at 12 watts, which Satco rates as a 50 watt incandescent equivalent. On a T5 fluorescent swap, compare against the lumen output of the tube you are removing rather than the wattage, since 1400 lumens is in the range of a shorter T5 lamp and not a high output tube. Color is 3500K neutral white with a CRI of 83, and the beam spread is 240 degrees, so light wraps around the tube rather than firing in one direction.
3) Does this Satco T5 LED work on a dimmer?
No. The S28693 is not dimmable. If it is wired to an existing dimmer or an occupancy sensor with dimming output, the circuit needs to be changed to straight on/off switching. For dimming in a linear fluorescent retrofit you need a lamp specifically listed as dimmable on a compatible driver or dimming system.
4) Can I use this T5 LED tube in an enclosed or damp fixture like a bathroom vanity or cooler?
Enclosed rated, so it can go in a sealed or gasketed fixture without voiding the rating, and it carries a damp location rating. Damp covers covered exterior soffits, bathrooms, and similar humid spaces. It is not a wet location lamp, so skip direct rain exposure or washdown areas.
5) What base does the Satco S28693 use, and will it drop into my existing T5 sockets?
It uses a miniature bi-pin base, which is the standard T5 fluorescent socket pin arrangement, so it seats in existing T5 tombstones. The mechanical fit is only half the job though, since this is a ballast bypass lamp the sockets have to be fed line voltage after the ballast is removed.
6) Does it matter which way the fixture is mounted, vertical or horizontal?
No restriction. Burning position is universal on this T5 LED, so it can be mounted horizontally, vertically, or base up in a cove, valance, or undercabinet housing without affecting rated life.
7) Is 3500K the right color to match the other tubes in my building?
3500K is neutral white, between the warmer 3000K and the cooler 4000K commonly spec'd in offices and corridors. This lamp is fixed at 3500K and is not CCT selectable, so if your facility is standardized at 4000K or 5000K you will see a visible mismatch in the same room and should order a lamp in the matching temperature instead. CRI is 83, which is typical for general commercial lighting.
8) Will this Satco LED tube run on 277V commercial lighting circuits?
Yes. The S28693 operates across 120V to 277V at 50/60Hz, so the same lamp works on residential 120V and on 277V commercial branch circuits. Current draw runs 0.100A down to 0.043A depending on the supply voltage, which is useful when you are counting lamps on a circuit.
9) Does the Satco S28693 qualify for a DLC utility rebate?
No. This lamp is not DLC approved, so it will not qualify for utility incentive programs that require a DesignLights Consortium listing. It is Title 24 compliant and FCC compliant. If the rebate is driving the project, you need a DLC listed replacement lamp instead.
10) Is this T5 LED glass or plastic, and does it have a frosted diffuser?
Glass tube and glass lens with a frost finish, on a white housing. The frost diffuses the LEDs so you do not see hot spots through the fixture lens, which matters in open strip or valance fixtures where the tube is visible. Glass is more rigid than a plastic hybrid tube, so handle it as you would a fluorescent lamp on install.
How fast can I get the Satco Lighting S28693 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28693 come with a warranty?
Absolutely. The Satco Lighting S28693 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28693?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28693 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.