You may also like
SATCO Lighting S28786 15.5W, A19 LED, 3000K, Medium Base, 220 degree Beam Angle, 120V
15.5 Watt - A19 LED - 3000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Country of Origin:
- China
- CRI:
- 80+
- Dimmable:
- Non-Dimmable
- Product Weight:
- 0.11 lb
- Lumens:
- 1600L
Satco Lighting S28786 – Frequently Asked Questions
1) Can the Satco S28786 A19 LED bulb be used on a dimmer switch?
No. The S28786 is a non-dimmable lamp. Put it on a dimmer circuit and you can expect flicker, buzz, or early failure. If the fixture is wired to a dimmer, either swap the switch for a standard toggle or specify a dimmable A19 LED instead.
2) Is 3000K the right color temperature for apartment units and corridors?
3000K is a warm white, a little crisper than the 2700K of a classic incandescent but still warm enough for residential interiors, hotel rooms, and multi-family corridors. If you are standardizing a building, pick one temperature and stay on it. The S28786 also runs 80+ CRI, which is the normal benchmark for general interior lighting.
3) Will a 220 degree beam angle A19 LED light a room evenly or does it throw light in one direction?
The 220 degree beam angle gives near-omnidirectional spread, so light wraps up and around the bulb rather than firing forward like a reflector lamp. That makes it usable base-up in a ceiling fixture or base-down in a table lamp with no dark patch over the shade. The frosted finish diffuses the LED sources so you do not see individual hot spots.
4) Does the Satco S28786 run on standard 120V building power?
Yes, it is a 120 volt lamp for standard line-voltage residential and commercial circuits. No driver, transformer, or ballast is involved, so it cannot be used in a low-voltage fixture or in a lamp holder fed from a fluorescent ballast without rewiring to line voltage.
5) Is this A19 LED light enough to ship in bulk for a property-wide relamp?
Each lamp weighs 0.11 lb, so case quantities for a full-building relamp stay light to handle and freight cheap relative to the bulb count. The lamp is made in China.
6) Where can I get the manufacturer spec sheet for Satco S28786?
Satco publishes a PDF spec sheet for the S28786 at https://media.distributordatasolutions.com/269/xlsx_satco/30f6200c6b0de6d2c7de3943e6ed069ca94a0524.pdf. That is the document to attach to a submittal or a bid package when the drawing calls for lamp data.
How fast can I get the Satco Lighting S28786 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28786 come with a warranty?
Absolutely. The Satco Lighting S28786 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28786?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28786 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.