SATCO Lighting S28785 15.5W, A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.64

SATCO Lighting S28785 15.5W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S28785
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.64
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S28785 15.5W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V

15.5 Watt - A19 LED - 2700K - Medium base - 220 deg. Beam Angle -120 Volt

Manufacturer Resources

Product Specs

Amps:
0.129A
Avg Rated Hours:
15000
Burning Position:
Universal
CA T20 Alt Sub:
S8652; S8566
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
Frost
Lensed:
Yes
Lumens:
1600L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
100W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
15.5W
Product Weight:
0.11 lb

Satco Lighting S28785 – Frequently Asked Questions

1) Can the Satco S28785 A19 LED be used on a dimmer switch?
No. The S28785 is a non-dimmable lamp. Put it on a dimmer circuit and you risk flicker, buzz, or early failure. If the fixture is on a dimmer, either leave the dimmer at full on and replace the control with a standard switch, or order a dimmable A19 instead.
2) Can this Satco A19 LED go in a fully enclosed ceiling fixture or a glass globe?
Yes. The S28785 is an enclosed rated lamp, so it is built to handle the trapped heat inside a closed globe, flush mount, or jelly jar. It also carries a universal burning position rating, meaning base up, base down, or horizontal are all fine.
3) Is this A19 LED bulb rated for outdoor porch or covered entry use?
It is an indoor-rated lamp with a damp location rating. That makes it acceptable in a covered, protected spot like an enclosed porch ceiling or a bathroom, but not in a wet location where it would see direct rain or spray. For exposed outdoor fixtures, specify a wet-location lamp.
4) Can the Satco S28785 be shipped to or installed in California?
No. The S28785 is flagged non-compliant for California Title 20. Satco lists S8652 and S8566 as the Title 20 alternate substitutes for projects in that state.
5) Will this bulb work in a 3-way lamp socket?
It is not a three-way lamp. Screwed into a 3-way socket it will typically light at only one level rather than stepping through low, medium, and high. For a 3-way table lamp, order a lamp specifically built as three-way.
6) How much light spread does a 220 degree beam angle give compared to a standard bulb?
A 220 degree beam spread throws light sideways and backward past the base, not just forward, so the S28785 behaves like an omnidirectional bulb in table lamps, shaded fixtures, and open ceiling globes. The frosted lens diffuses the LED sources so you do not see hot spots through a shade.
7) Is 2700K with 80 CRI good enough for apartment interiors and hospitality guest rooms?
2700K at 80 CRI is the standard warm-white spec for residential and hospitality interiors, and it is what matches existing incandescent and warm LED lamps already in a building. If you are standardizing across a property, note this lamp is fixed at 2700K, with no color-selectable switch, so every bulb from this part number renders the same.
8) What is the rated life and current draw on the Satco S28785, and how many can I put on one circuit?
Each lamp is rated 15,000 average hours and draws 0.129 amps at 120 volts, 60 Hz. At that draw, current is a non-issue for load calculations in most fixture groups, though your circuit loading should always follow the breaker rating and local code.
9) Does this Satco A19 LED qualify for DLC utility rebates?
No. The S28785 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference.
How fast can I get the Satco Lighting S28785 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28785 come with a warranty?
Absolutely. The Satco Lighting S28785 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28785?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28785 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.