SATCO Lighting S29416 12.5W, PAR30SN LED, 3000K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30SN LED - 3000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30SN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29416 – Frequently Asked Questions
1) Can I put this LED PAR30 in a fully enclosed outdoor fixture?
Yes on both counts. The S29416 is an enclosed rated lamp, so sealed fixtures that trap heat are acceptable, and it carries a Wet location rating for indoor and outdoor use. That covers soffit cans, enclosed landscape and entry fixtures, and covered canopies. Burning position is universal, so it can be aimed up, down, or horizontal.
2) Is the Satco S29416 dimmable, and will it hold color as it dims?
Dimmable, yes. It is a fixed 3000K lamp with no color-select switch and it is not a three-way lamp, so it holds 3000K through the dimming range rather than shifting warm. Put it on a dimmer rated for LED loads: at 0.104A draw per lamp, a group of these presents a very small load, which is the usual cause of flicker or drop-out on older incandescent dimmers.
3) Is a 40 degree beam angle right for general room lighting or for accenting artwork?
Forty degrees is a flood spread, suited to general downlighting in recessed cans and washing a retail or lobby wall evenly. It is too wide to punch a tight highlight onto a single piece of artwork or merchandise; for that you want a narrow flood or spot in the 10 to 25 degree range. At 3000K with a CRI of 90, the color rendering is high enough for retail display and hospitality finishes.
4) Will this PAR30 LED pass a California Title 24 lighting inspection?
The S29416 is California T24 listed. It is not DLC listed, so if your utility or state rebate program requires a DLC qualified product number, this lamp will not satisfy that paperwork. It is FCC compliant for radio interference.
5) How many of these can I run on a single 15 amp circuit?
Each S29416 draws 0.104A at 120V, 60Hz. Even derating a 15A branch circuit to the usual 80 percent continuous load of 12A, the lamps themselves are not the limit on a typical track or recessed run. Size the circuit to the fixture and dimmer ratings, not the lamp count.
6) Will the glass or lens crack if a tenant or a cleaning crew knocks it?
There is no glass to break. The lens is clear thermoplastic (PBT) and the base is plastic, with a silver housing, and the lamp weighs 0.35 lb. That makes it a reasonable choice for stairwells, corridors, and multi-family common areas where a dropped lamp is a routine event.
How fast can I get the Satco Lighting S29416 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29416 come with a warranty?
Absolutely. The Satco Lighting S29416 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29416?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29416 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.