You may also like
SATCO Lighting S29415 12.5W, PAR30SN LED, 2700K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30SN LED - 2700K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30SN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Material:
- Plastic
- Product Weight:
- 0.35 lb
Satco Lighting S29415 – Frequently Asked Questions
1) Will the Satco S29415 PAR30 LED work in an enclosed or recessed can with a trim?
Yes. The S29415 is an enclosed rated lamp, so it can run inside a sealed or trimmed recessed housing without voiding the lamp rating. Burning position is universal, so it works pointed down in a can, up in an uplight, or horizontal in a track head.
2) Is a PAR30 short neck the same as a PAR30 long neck, or do I need to match it?
Match it. The S29415 is a PAR30SN, the short neck version, which is what most recessed cans and shallow track heads are built around. A long neck (PAR30LN) sits roughly half an inch deeper and is used where the fixture needs the extra reach; swapping one for the other can leave the lamp face proud of the trim or buried too deep.
3) What incandescent PAR30 does a 12.5W LED replace?
It replaces a 75W incandescent PAR30, drawing 12.5 watts and 0.104 amps at 120V while producing 1000 lumens. On a 15A branch circuit that load difference is what lets a property manager relamp a long run of track or cans without rebalancing the circuit.
4) Will this bulb match the warm color of the halogen PAR30s already in my ceiling?
2700K is the warm white point that reads closest to incandescent and halogen, so it blends with existing halogen cans rather than looking blue beside them. CRI is 90, which keeps skin tones, wood, and paint colors looking natural in hospitality and residential spaces. It is a fixed color temperature lamp, not CCT selectable, so every unit is the same 2700K across a building.
5) Does this Satco PAR30 meet California Title 24 for a residential or commercial relamp there?
Yes, the S29415 is California T24 listed. It is also FCC compliant. It is not DLC approved, so if your utility rebate program requires a DLC listed product, this lamp will not qualify for it.
6) Can I put these on a dimmer?
The S29415 is dimmable on 120V, 60Hz line voltage. It is not a three-way lamp, so do not install it in a three-way socket expecting stepped output. For smooth low end performance use an LED rated dimmer rather than an old magnetic or incandescent only control.
7) Is the Satco S29415 only sold in one version, or do I have to pick a color temperature and beam?
Nothing to configure. S29415 is a single build: 12.5W, PAR30SN, 2700K, 40 degree beam, clear lens, medium base, 120V. Order by that part number and every unit matches, which is what you want when standardizing a floor or a whole property.
8) How long before I have to get a ladder back out to these?
Average rated life is 25,000 hours. At roughly 12 hours a day in a lobby or corridor that is several years between relamps, which is the whole argument for swapping halogen PAR30s out in high ceiling or hard access locations.
9) What is the lens and body made of, and will it hold up in a hot recessed can?
The lens is clear thermoplastic (PBT) and the base is plastic, with a silver housing, and the lamp weighs 0.35 lb. The clear lens means the LED array is visible rather than diffused, so aim it where it will not be stared into directly. Being enclosed rated, it is built for the heat that builds up inside a closed can.
How fast can I get the Satco Lighting S29415 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29415 come with a warranty?
Absolutely. The Satco Lighting S29415 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29415?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29415 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.