You may also like
SATCO Lighting S29420 12.5W, PAR30SN LED, 2700K, 60 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30SN LED - 2700K - 60 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30SN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 60
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29420 – Frequently Asked Questions
1) Can I use this LED PAR30 in an enclosed or airtight recessed fixture?
Yes, it is an enclosed rated lamp, so sealed or airtight housings are fine. Many LED PAR lamps are not, and running a non-enclosed-rated lamp in a sealed can shortens its life. Burning position is universal, so it can point up, down, or sideways.
2) Is the Satco S29420 PAR30 rated for outdoor soffit and landscape fixtures?
It carries a wet location rating and is listed for indoor and outdoor use, so soffits, covered entries, and exterior fixtures exposed to rain are within rating as long as the fixture itself is rated for the location.
3) What incandescent PAR30 does this 12.5W LED replace, and will the light level match?
It replaces a 75W incandescent PAR30 at 12.5 watts, putting out 1000 lumens. Current draw is 0.104A on 120V, 60Hz, so you can stack far more lamps on a circuit than with the incandescents you are pulling out.
4) Will the 2700K color match the incandescent and halogen PAR30s already in my building?
2700K is warm white, the same appearance as standard incandescent and most halogen PAR lamps, so it blends with existing cans rather than reading blue next to them. CRI is 90, so skin tones, wood, and paint colors render close to what the halogens were doing. Color temperature is fixed, not field selectable, so every lamp out of the box is 2700K.
5) Is this PAR30 LED dimmable, and is it a 3-way bulb?
Dimmable, yes. It is not a 3-way lamp, so it will not step through levels in a 3-way socket. For dimming, use an LED-compatible dimmer; older magnetic incandescent dimmers are a common cause of flicker and limited low-end range on LED PAR lamps.
6) Does the Satco S29420 meet California Title 24 for residential recessed lighting?
It is California T24 listed, which matters if you are specifying lamps for new residential work or alterations in California. Note it is not DLC listed, so it will not qualify for commercial utility rebate programs that require DLC.
7) How long will these last before my maintenance crew has to go back up the ladder?
Average rated life is 25,000 hours. On a 12-hour-a-day lobby or corridor schedule that is roughly five to six years of service, which is why property managers relamping whole floors at once tend to standardize on a single lamp like this.
8) What is the S29420 lamp actually made of, and will it survive being handled on a relamp?
The housing is plastic with a silver finish, the base is plastic, and the lens is clear thermoplastic (PBT). No glass envelope to shatter in a lift basket, and the lamp weighs 0.35 lb so it does not load a lightweight socket or gimbal trim.
9) Will this LED PAR30 cause interference with AV or wireless gear in a conference room?
The lamp is FCC compliant, which addresses the electromagnetic emissions that cause buzz in audio systems and interference with remote controls. If you are retrofitting a boardroom or AV space, that is the spec to check and this one carries it.
10) What part number do I order and are there any options to specify?
Order Satco S29420. There is one configuration, a clear lens, so nothing else to select. It ships as a 12.5W 2700K PAR30SN with a 60 degree flood beam, medium base, 120V.
How fast can I get the Satco Lighting S29420 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29420 come with a warranty?
Absolutely. The Satco Lighting S29420 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29420?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29420 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.