You may also like
SATCO Lighting S29423 12.5W, PAR30SN LED, 4000K, 60 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30SN LED - 4000K - 60 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30SN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 60
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.24 lb
- Product Material:
- Plastic
Satco Lighting S29423 – Frequently Asked Questions
1) Can the Satco S29423 PAR30 LED go in a fully enclosed recessed can or a sealed outdoor fixture?
Yes. The S29423 is an enclosed rated lamp, so a sealed or gasketed housing won't void its rating, and it carries a Wet location rating for indoor or outdoor use. Burning position is universal, so it can point down in a can, up in an uplight, or sideways in a wall wash.
2) Will this Satco PAR30 dim on my existing halogen dimmers?
The S29423 is a dimmable lamp on 120V, 60Hz, drawing 0.104A. Because it draws so little current, a legacy incandescent dimmer loaded with only one or two of these can fall below the dimmer's minimum load and flicker or drop out at the low end. LED-rated (electronic low-load) dimmers are the safer choice on light-load circuits.
3) Is 4000K the right color for re-lamping a whole building, or should I stay with warmer bulbs?
4000K is neutral white, cooler and crisper than the 2700K to 3000K warm light of the halogens most buildings started with. It reads clean in offices, corridors, garages, back-of-house and retail, but it will look noticeably bluer than surrounding 3000K lamps, so mixing it into a partially re-lamped space shows. Color is fixed at 4000K here, not field selectable. CRI is 90, so finishes and merchandise colors hold up well.
4) Does the Satco S29423 qualify for California Title 24 lighting requirements?
It is listed as California T24 Listed, so it can be used where Title 24 compliant lamps are called for. It is not DLC listed, which matters if your utility rebate program requires DLC qualification for the fixture or lamp.
5) Can I use this in a three-way lamp socket?
No. The S29423 is not a three-way lamp. Screwed into a three-way socket it will run at a single output level regardless of switch position, so for a fixture where the tenant expects three brightness steps you need a lamp specifically built as three-way.
6) What is the lens and body made of on this PAR30 LED, and does it look like glass?
The lens is clear thermoplastic (PBT) rather than glass, with a silver housing and a plastic base. Lighter and less breakage-prone than a glass halogen PAR, which helps in parking structures, stairwells and anywhere a dropped lamp is a cleanup. The clear lens with a 60 degree flood optic keeps the aperture bright rather than milky.
7) How much load do these add per circuit if I'm re-lamping a large number of cans?
Each lamp draws 0.104A at 120V, 12.5W. On a 20A branch circuit at an 80 percent continuous load allowance (16A) that's well over a hundred lamps electrically, so in practice the limit becomes the dimmer or relay rating and your panel schedule, not the lamps.
8) What exact part number do I order for the 4000K 60 degree PAR30 short neck from Satco?
Order Satco S29423. It's the 12.5W PAR30SN LED, 4000K, 60 degree beam, medium base, 120V, offered in the clear lens version only.
How fast can I get the Satco Lighting S29423 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29423 come with a warranty?
Absolutely. The Satco Lighting S29423 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29423?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29423 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.