You may also like
SATCO Lighting S29418 12.5W, PAR30SN LED, 4000K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30SN LED - 4000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30SN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29418 – Frequently Asked Questions
1) Can the Satco S29418 PAR30 LED go in an enclosed or recessed can with a trim that seals?
Yes. The S29418 is an enclosed rated lamp, so it can run inside a sealed fixture or a recessed can with a closed trim without voiding its rating. It is also wet location rated and listed for both indoor and outdoor use, which covers soffit cans and exterior eyebrow fixtures.
2) Will 4000K match the lamps already in the rest of my building?
The S29418 is a fixed 4000K lamp, a neutral white commonly used in offices, corridors and retail. It is not CCT selectable, so if the other openings are running 2700K or 3000K warm white, this one will read visibly cooler beside them and you should order the matching temperature instead.
3) Is the Satco S29418 dimmable, and how much load does it put on a dimmer?
Dimmable, yes. At 12.5 watts and 0.104 amps on 120V, 60Hz, a run of these draws very little current, so check the minimum load of your dimmer as much as the maximum. Older magnetic-type and high-minimum-load dimmers are the usual cause of flicker or drop-out with low wattage LED lamps.
4) Is a 40 degree beam angle right for general recessed downlights, or should I use a narrower spot?
A 40 degree beam is a flood pattern, which suits general downlighting over hallways, lobbies, kitchens and open retail floor where you want overlapping coverage from cans on normal spacing. If the goal is to pick out artwork, merchandise or a feature wall from a high ceiling, a narrower spot beam concentrates the 1000 lumens into a tighter pool instead.
5) Does this Satco PAR30 meet California Title 24?
The S29418 is California T24 listed, so it can be used where Title 24 compliant lamping is required. It is not DLC approved, which matters if you are chasing a utility rebate that runs off the DLC qualified products list.
6) Will this work in a three-way lamp socket?
No. The S29418 is not a three-way lamp, so in a three-way socket it will run at full output on every switch step rather than stepping through levels. For level control, pair it with a compatible dimmer instead, since the lamp is dimmable.
7) Is a 90 CRI PAR30 worth it for retail or hospitality color rendering?
The S29418 renders at 90 CRI, which is the threshold most retail, gallery and hospitality specs call for when merchandise color, skin tone or food appearance matters. Standard 80 CRI lamps cost less but flatten reds. At 4000K and 90 CRI this one reads neutral and accurate rather than warm.
8) Can I mount this lamp base up, base down, or horizontally?
Universal burning position, so the S29418 can be installed base up in a recessed can, base down in a pendant or track head, or horizontal in a wall wash fixture with no derating or orientation restriction.
9) What is the lamp body made of, and is there a glass lens to break?
No glass. The S29418 uses a clear thermoplastic (PBT) lens over a plastic body with a silver housing and a plastic medium base. That makes it a safer choice than glass PAR lamps in gyms, schools and food service areas where breakage is a concern. Each lamp weighs 0.35 lb.
How fast can I get the Satco Lighting S29418 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29418 come with a warranty?
Absolutely. The Satco Lighting S29418 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29418?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29418 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.