SATCO Lighting S29438 12.5W, PAR30LN LED, 4000K, 60 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30LN LED - 4000K - 60 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30LN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 60
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Material:
- Plastic
- Product Weight:
- 0.35 lb
Satco Lighting S29438 – Frequently Asked Questions
1) Can the Satco S29438 PAR30LN LED go in a sealed or enclosed recessed can?
Yes. The S29438 is an enclosed rated lamp, so it can run in a sealed or gasketed recessed housing without voiding its rating. That matters because most LED PAR lamps trap heat in a closed can and fail early. It is also wet location rated and listed for both indoor and outdoor use, so the same lamp works in soffit cans, covered entries and canopy fixtures.
2) What wattage incandescent PAR30 does this 12.5W LED replace?
It replaces a 75W incandescent PAR30. The LED draws 12.5 watts at 120 volts, 0.104 amps, and puts out 1000 lumens. On a circuit that was running twelve 75W lamps, that drops the connected load from 900W to 150W, which is the number a property manager or electrician needs when reloading an existing lighting circuit.
3) Will 4000K match the other bulbs already in my building?
4000K is neutral or cool white, noticeably whiter than the 2700K to 3000K warm tone most incandescent and halogen PAR lamps produced. If the adjacent cans still have halogen or 3000K LED in them, the S29438 will read blue by comparison, so change out a whole run or a whole room rather than one lamp. The colour temperature is fixed, not field selectable.
4) Is the colour rendering good enough for retail or healthcare spaces?
CRI is 90, which is the threshold most retail, hospitality and healthcare specs call for when colour accuracy matters on merchandise, finishes or skin tone. Standard LED PAR lamps often sit at 80 CRI, so this is the higher rendering option in the category.
5) Does this Satco PAR30LN meet California Title 24?
Yes, the S29438 is California T24 listed. It is not DLC approved, so if your utility rebate program requires a DLC listing for the lamp, this one will not qualify for it. It is FCC compliant.
6) Will this work on a three-way lamp socket?
No. The S29438 is not a three-way lamp. In a three-way socket it will run at a single output level, or may not light on the low setting at all. For three-way fixtures you need a lamp built for it. It is dimmable, so a standard socket on a dimmer is the better way to get multiple levels.
7) Can this lamp be mounted base up, base down or horizontally?
Burning position is universal, so it can run base up in a recessed can, base down in a pendant or track head, or horizontal in a wall wash or sconce with no derating. Rated life is 25,000 hours in any of those orientations.
8) What are the housing and lens made of on this Satco LED PAR30?
The body is silver with a plastic base, and the lens is clear thermoplastic PBT rather than glass. A plastic lens does not shatter like the glass face on an old halogen PAR, which matters in gymnasiums, food service areas and parking canopies where a dropped lamp is a cleanup problem. Being lensed and clear, it delivers the full 1000 lumens through a defined 60 degree flood pattern.
9) How long before these need relamping in a 12 hour a day facility?
Rated average life is 25,000 hours. At 12 hours a day, seven days a week, that is roughly 5.7 years before the scheduled relamp. At 24/7 operation it is about 2.9 years. That is the number to build a maintenance cycle around on corridor and canopy lighting.
How fast can I get the Satco Lighting S29438 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29438 come with a warranty?
Absolutely. The Satco Lighting S29438 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29438?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29438 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.