SATCO Lighting S29595 9.5W, A19 LED, Frosted, 5000K Medium Base, 220 degree Beam Angle, 120V, Non-Dimmable
9.5 Watt - A19 LED - Frosted - 5000K Medium base - 220 deg. Beam Angle - 120 Volt - Non-Dimmable
Manufacturer Resources
Product Specs
- Amps:
- 0.079A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9.5W
Satco Lighting S29595 – Frequently Asked Questions
1) Can the Satco S29595 A19 LED be used on a dimmer switch?
No. The S29595 is a non-dimmable lamp. Put it on a dimmer circuit and you can get flicker, buzz, or early failure. If the fixture is on a dimmer, either swap the switch for a standard toggle or order a dimmable A19 instead. It's also not a three-way bulb, so it won't work in a 3-way socket application that expects two light levels.
2) Is this Satco 9.5W A19 LED legal to sell or install in California?
No. The S29595 is flagged Non-Compliant for California, so it should not be specified for jobs in that state. For CA properties, pick an A19 LED that carries a compliant designation. Everywhere else it's a standard 120V, 60Hz medium base lamp with no restriction in the data.
3) Will this LED bulb work in an enclosed ceiling fixture or a closed globe?
Yes. The Satco S29595 is an enclosed rated lamp, so sealed drum fixtures, closed globes, and jelly-jar style housings are fine. Burning position is universal, meaning it can be mounted base up, base down, or horizontal without affecting life. Many LED A19s are not enclosure rated, which is the usual reason they fail early in a closed fixture.
4) Can I put this Satco A19 LED in an outdoor porch light or a bathroom?
Damp location rated and listed for indoor use. That covers a bathroom, a laundry room, or a covered porch ceiling fixture that stays out of direct rain. It is not wet rated, so do not use it in an open exterior fixture exposed to weather or in a location subject to direct water.
5) Is a 9.5W LED bright enough to replace the 60W incandescent bulbs in my units?
Yes, it's a direct 60W incandescent replacement at 800 lumens, drawing 9.5 watts and 0.079 amps on 120V. The light quality is different though: at 5000K it reads as crisp daylight white, not the warm yellow of the incandescent it replaces. If the tenant is used to soft white, they will notice.
6) Is 5000K too harsh for apartment living spaces, or where should I use it?
5000K is daylight white, best suited to task and utility areas: garages, stairwells, laundry rooms, storage, basements, back-of-house corridors, and workshop lighting. For bedrooms, living rooms, and hospitality guest areas most buyers go warmer. This lamp is fixed at 5000K, with no CCT selectable switch, so you cannot dial it back on site.
7) How long will these Satco LEDs last before maintenance has to change them out again?
Average rated life is 15,000 hours. On a common area fixture running roughly 12 hours a day that's about 3.4 years between relamps; on a 24/7 stairwell it works out to a little under two years. Useful number if you are planning a scheduled group relamp rather than chasing service calls.
8) Does this Satco A19 LED qualify for a DesignLights Consortium utility rebate?
No, the S29595 is not DLC approved, so it won't qualify under rebate programs that require a DLC listing. If the rebate is driving the purchase, confirm the program's qualified products list before you commit to a quantity.
9) Is the color rendering on this bulb good enough for retail or inspection work?
CRI is 80, which is the standard general-purpose figure for commercial LED lamps. It's fine for corridors, offices, storage, and back-of-house. For color-critical work such as retail merchandise display, paint matching, or medical exam areas, specify a 90+ CRI lamp instead.
10) Will this LED bulb interfere with radios, garage door openers, or other electronics?
The S29595 is FCC compliant, so it meets the electromagnetic interference limits for consumer LED lamps. That's the spec worth checking when bulbs are going near an AV rack, a radio room, or security equipment, since non-compliant cheap LED drivers are a known source of RF noise.
How fast can I get the Satco Lighting S29595 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29595 come with a warranty?
Absolutely. The Satco Lighting S29595 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29595?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29595 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.