SATCO Lighting S29615 13W, BR4...
In stock
$10.93
Satco Lighting SAT-S29615 13 Watt - BR40 LED - 2700K - Medium base - 120 Volt

SATCO Lighting S29615 13W, BR40 LED, 2700K, Medium Base, 120V

(No reviews yet) Write a Review

Model: S29615
Selected Finish is

In stock

$10.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S29615 13W, BR40 LED, 2700K, Medium Base, 120V

13 Watt - BR40 LED - 2700K - Medium base - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.108A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
California T24 Listed
CCT Selectable:
No
CRI:
90+
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Open Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
BR40
Lens Finish:
Frost
Lensed:
Yes
Lumens:
1075L
Operating Frequency:
60Hz
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
85W
Location Rating:
Damp
Base Material:
Plastic
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
103
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
13W
Product Weight:
0.31 lb
Product Material:
Plastic
Department:
Electrical

Satco Lighting S29615 – Frequently Asked Questions

1) Can the Satco S29615 BR40 LED be used in a sealed or fully enclosed recessed can?
No. The S29615 is an open rated lamp, so it needs a fixture that breathes. Putting it in a fully enclosed or airtight sealed housing traps heat around the driver and shortens the life well short of the 25,000 hour rating. For a closed can, choose a BR40 LED specifically marked enclosed rated.
2) Is the Satco S29615 BR40 dimmable on an existing wall dimmer?
Yes, the lamp is dimmable at 120V, 60Hz. It is not a three-way lamp, so do not put it in a three-way socket expecting stepped output. As with any LED retrofit, an older incandescent-only dimmer may buzz or drop out at the low end; an LED-rated dimmer gives the smoothest range.
3) Can I use this BR40 LED in a covered porch or bathroom fixture?
Damp location rated and listed for indoor use, so a bathroom, covered soffit or porch fixture protected from direct water is fine. It is not wet rated, so keep it out of anything exposed to rain or direct spray.
4) Is the light from this Satco BR40 warm enough to match my existing incandescent bulbs?
At 2700K it reads as warm white, the same visual color as a standard incandescent, and the frosted lens diffuses the source so you do not see hot spots. The color is fixed, not CCT selectable, so every lamp in a fleet order matches.
5) Does this Satco BR40 have high enough color rendering for hospitality or retail spaces?
CRI is 90+, which is the range specifiers ask for in hotel guest rooms, restaurants and retail where skin tones and merchandise color matter. Standard LED lamps usually sit around 80 CRI, so this is a step up on color quality at the same 2700K warm point.
6) Does the Satco S29615 BR40 meet California Title 24 requirements?
Yes, it is California T24 listed, so it can be used where Title 24 compliant lamps are called for. It is not DLC listed, which matters if your utility rebate program requires DLC qualification.
7) Can this BR40 LED be installed base-up in a recessed can or does it have to point down?
Burning position is universal, so base-up in a downlight, horizontal in a wall sconce, or base-down in a pendant all work. That makes it easy to standardize one lamp across mixed fixture types in a building.
8) How much current does the Satco 13W BR40 LED draw for circuit load calculations?
Each lamp draws 0.108 amps at 120 volts, 60 Hz. That is roughly 1/7 the current of the 85 watt incandescent it replaces, so a circuit that was near capacity on incandescent floods has plenty of headroom after the retrofit.
9) What is the housing and base made of on this Satco BR40 LED?
The base is plastic and the housing is gray with a frosted lens over the LED. Plastic base means no galling in an aluminum socket, but it also means you tighten by hand only, no pliers.
How fast can I get the Satco Lighting S29615 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29615 come with a warranty?
Absolutely. The Satco Lighting S29615 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29615?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29615 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!