SATCO Lighting S9634 11.5W, LE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.95
Satco Lighting SAT-S9634 11.5 Watt - LED BR40 - 2700K - 103 deg. Beam Angle - Medium base - 120 Volt - Dimmable

SATCO Lighting S9634 11.5W, LED BR40, 2700K, 103 degree Beam Angle, Medium Base, 120V, Dimmable

(No reviews yet) Write a Review

Model: S9634
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9634 11.5W, LED BR40, 2700K, 103 degree Beam Angle, Medium Base, 120V, Dimmable

11.5 Watt - LED BR40 - 2700K - 103 deg. Beam Angle - Medium base - 120 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.096A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S29615
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Open Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
BR40
Lens Finish:
Frost
Lensed:
Yes
Lumens:
940L
Operating Frequency:
60Hz
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
65W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
103
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Weight:
0.31 lb
Department:
Electrical

Satco Lighting S9634 – Frequently Asked Questions

1) Can the Satco S9634 BR40 go in a fully enclosed recessed can or a sealed fixture?
No. The S9634 is an open rated lamp, so it needs a recessed can or fixture that is open and vents heat. Dropping it into a sealed or fully enclosed housing runs it hotter than it is rated for and shortens the 25,000 hour life. For enclosed cans you need a lamp specifically marked enclosed rated.
2) Can I use this BR40 in a California project?
No, not for Title 20 compliance. The S9634 is flagged non-compliant for California, and Satco lists the S29615 as the Title 20 alternate substitution for that market. For anything bid in California, order the alternate instead.
3) What incandescent BR40 does the 11.5W S9634 replace, and will the rooms look as bright?
It replaces a 65 watt incandescent BR40 at 11.5 watts, putting out 940 lumens at 2700K. That is the same warm white people expect from the incandescent floods it is swapping out, so retrofitting a hallway or lobby of cans won't shift the color of the space.
4) Will the Satco S9634 work on my existing dimmer?
The lamp is dimmable on 120V line voltage. It is not a three-way bulb, so it will not step through levels in a three-way socket. Older high-wattage incandescent dimmers often have a minimum load well above the 0.096 amp this lamp draws, which is where flicker or drop-out at the low end comes from, so an LED-rated dimmer is the safer pairing on a retrofit.
5) Can I use this BR40 in a covered porch or a bathroom?
Damp location rated and listed for indoor use, so a bathroom, shower-adjacent can, or a covered soffit that never sees direct water is fine. It is not wet rated, so skip exposed eaves, open patios, or anywhere rain or spray can reach the lamp.
6) Does the Satco S9634 qualify for utility rebates?
It is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference, which matters in facilities with sensitive equipment nearby.
7) Can I mount this BR40 base-up in a can or base-down in a pendant?
Either way. Burning position is universal, so base-up in recessed cans, base-down in pendants and open fixtures, and horizontal in a wall sconce or track head all run within spec.
8) Is the S9634 good enough color quality for guest rooms or retail?
CRI is 80 at 2700K, which is the standard for hospitality and multi-family common areas and renders skin tones and warm finishes acceptably. It is a fixed color temperature lamp, not CCT selectable, so if you are standardizing a building on one warm white you will get consistent output can to can.
9) What does the Satco BR40 LED look like in the fixture when it's off?
Gray housing with a frosted lens. In an open can with a wide trim the gray body is partially visible from below, which is worth knowing if you are matching the look across a run of exposed-lamp fixtures. The lamp weighs 0.31 lb.
How fast can I get the Satco Lighting S9634 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9634 come with a warranty?
Absolutely. The Satco Lighting S9634 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9634?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9634 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!