SATCO Lighting S9635 11.5W, LE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.33
Satco Lighting SAT-S9635 11.5 Watt - LED BR40 - 3000K - 103 deg. Beam Angle - Medium base - 120 Volt - Dimmable

SATCO Lighting S9635 11.5W, LED BR40, 3000K, 103 degree Beam Angle, Medium Base, 120V, Dimmable

(No reviews yet) Write a Review

Model: S9635
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9635 11.5W, LED BR40, 3000K, 103 degree Beam Angle, Medium Base, 120V, Dimmable

11.5 Watt - LED BR40 - 3000K - 103 deg. Beam Angle - Medium base - 120 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.096A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S28580
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Open Rated Lamp
FCC Compliant:
Yes
Housing Color:
Gray
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
BR40
Lens Finish:
Frost
Lensed:
Yes
Lumens:
940L
Operating Frequency:
60Hz
Product Type:
Reflector
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
65W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
103
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Weight:
0.31 lb

Satco Lighting S9635 – Frequently Asked Questions

1) Will the Satco S9635 BR40 LED work in a recessed can with a dimmer switch?
The S9635 is dimmable on a 120V circuit, so it will work on a dimmer. One caution on the can itself: it is an open rated lamp, meaning it is built for an open recessed housing, not a fully enclosed fixture. If your cans are gasketed and sealed shut, this is not the lamp for that opening. Draw is 0.096A at 60Hz.
2) What incandescent BR40 flood does the Satco S9635 replace?
It replaces a 65W incandescent BR40 flood, which is the standard can lamp in most older residential and hospitality ceilings. The LED pulls 11.5W and puts out 940 lumens. Same medium screw base, so it goes straight into the existing socket with no change to the fixture.
3) Can I use this Satco BR40 in a bathroom or a covered exterior soffit?
Damp location rated and listed for indoor use. That covers a bathroom, a shower room ceiling outside the direct spray, or a covered interior corridor. It is not wet rated, so an exposed outdoor soffit that takes driving rain or an open porch fixture needs a wet rated lamp instead.
4) Can I ship the Satco S9635 to a job in California?
The S9635 is marked non-compliant for California Title 20, so it is not the lamp to spec on a California job. Satco lists S28580 as the Title 20 alternate substitute for that market.
5) Will this Satco BR40 work in a 3-way lamp socket?
No. The S9635 is a single-level lamp with no 3-way function. Put it in a 3-way socket and you get one output level, 940 lumens, on whichever click positions energize it. For a 3-way table or floor lamp you need a lamp built for it.
6) Can the Satco S9635 be installed base-up in a downlight, or does the orientation matter?
Burning position is universal, so it runs base-up in a recessed downlight, base-down in a pendant or table fixture, or horizontal in a wall sconce with no effect on the lamp. That matters on a mixed relamp where the same part number goes into several fixture types.
7) Is the Satco S9635 a DLC listed lamp for a utility rebate?
It is not DLC approved, so it will not qualify on a rebate program that requires a DLC listing. It is FCC compliant for electromagnetic interference, which is the compliance mark that applies to the driver electronics in this lamp.
8) Does the S9635 have a frosted lens, or will I see LED diodes through it?
Frosted, and lensed, so you get a diffused face rather than visible diode points. That is the difference that matters in an open can where the lamp face is in view from the room. The housing behind the lens is gray.
How fast can I get the Satco Lighting S9635 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9635 come with a warranty?
Absolutely. The Satco Lighting S9635 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9635?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9635 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!