SATCO Lighting S29861 9W LED P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.86
Satco Lighting SAT-S29861 9 Watt LED PL 4-Pin - 5000K - 1100 Lumens - G24q base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

SATCO Lighting S29861 9W LED PL 4-Pin, 5000K, 1100 Lumens, G24q Base, 50000 Avg Rated Hours, Type A, Ballast dependent

(No reviews yet) Write a Review

Model: S29861
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S29861 9W LED PL 4-Pin, 5000K, 1100 Lumens, G24q Base, 50000 Avg Rated Hours, Type A, Ballast dependent

9 Watt LED PL 4-Pin - 5000K - 1100 Lumens - G24q base - 50000 Average rated hours - 120 Deg. Beam Angle - Type A - Ballast dependent

Manufacturer Resources

Spec Sheet

Product Specs

Avg Rated Hours:
50000
BAA Compliant:
No
Ballasting Requirements:
Ballast required
Burning Position:
Base Up or Down
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
82
DLC Approved:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
G24q (4-Pin)
Lamp Filament:
LED
Lamp Shape:
PL
Lens Finish:
Frost
Lensed:
Yes
Lumens:
1100L
Operating Frequency:
50/60Hz
Product Type:
PL
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Beam Spread Angle:
120
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
9W
Product Weight:
0.23 lb
Dimmable:
Yes

Satco Lighting S29861 – Frequently Asked Questions

1) Does the Satco S29861 LED PL lamp need the existing ballast, or do I have to rewire the fixture?
Keep the ballast. The S29861 is a ballast-dependent (Type A) 9W LED PL lamp, meaning it runs off the fixture's existing CFL ballast with no rewiring. If the ballast in your fixture is dead or you intend to bypass it, this is the wrong lamp, you would need a ballast-bypass (Type B) PL lamp instead.
2) Can this LED PL lamp go in an enclosed downlight or a closed wall sconce?
Yes, it is an enclosed-rated lamp, so sealed downlights, drum ceiling fixtures and closed sconces are fine. It is also damp location rated, which covers covered exterior soffits, breezeways and bathrooms. It is not wet location rated, so skip fixtures taking direct water.
3) What CFL wattage does this 9W LED PL replace in a stairwell or corridor fixture?
At 9 watts drawing 1100 lumens, the S29861 is rated as a 40W incandescent equivalent and is the common swap for a 4-pin quad-tube CFL in that output class. Output is 5000K daylight white with a CRI of 82, so expect a noticeably cooler, whiter light than a 2700K or 3500K CFL in the same fixture.
4) Can I mount the fixture base up, or does this lamp have to burn base down?
Either way. Burning position is base up or base down, so the same lamp works in a recessed can firing down and in a vertical-tube wall fixture. With a 120 degree beam spread and a frosted lens, the distribution is wide and diffuse rather than directional.
5) Will the S29861 dim on my existing fixture controls?
The lamp itself is listed as dimmable, but because it is a ballast-dependent Type A lamp the dimming behavior is controlled by the CFL ballast in the fixture. On a non-dimming instant or rapid start ballast it will run at full output only. Dimming requires a dimmable ballast already in the fixture.
6) How long will these last before my maintenance crew is back on the ladder?
Rated at 50,000 average hours. In a corridor or stairwell running 24/7 that is roughly 5.7 years of continuous operation, which is why these are a common standardization choice across multi-family and institutional common areas. Each lamp weighs 0.23 lb.
7) Is the Satco S29861 selectable color temperature or fixed 5000K?
Fixed. There is no CCT selector switch on this lamp, it is 5000K only, and it is not three-way. If you are standardizing a building, every unit you install will land at the same daylight-white color, which matters when you are mixing new lamps into fixtures that still have warmer CFLs in them.
How fast can I get the Satco Lighting S29861 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29861 come with a warranty?
Absolutely. The Satco Lighting S29861 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29861?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29861 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!