You may also like
SATCO Lighting S8565 12.5W, A19 LED, 5000K, Medium Base, 120V, 4-Pack
12.5 Watt - A19 LED - 5000K - Medium base - 120 Volt - 4-pack
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Product Weight:
- 0.07 lb
- Dimmable:
- Non-Dimmable
- Lumens:
- 1050L
- CRI:
- 90+
- Department:
- Electrical
- Product Type:
- LED Lamp
Satco Lighting S8565 – Frequently Asked Questions
1) Can the Satco S8565 A19 LED be used on a dimmer switch?
No. The S8565 is a non-dimmable lamp. On a dimmer circuit you can expect flicker, buzz, or no start at all, and the dimmer itself can be damaged. For dimmer-controlled fixtures, pick a Satco A19 LED specifically listed as dimmable; use the S8565 on standard on/off switches, occupancy sensors rated for LED loads, or hard-wired circuits.
2) Is 5000K too cold for apartment units, and where does it belong?
5000K reads as daylight, a crisp blue-white. For property managers that makes it a good match for laundry rooms, stairwells, parking garages, mechanical spaces, corridors, and work areas where you want everything to look bright and clean. It is usually the wrong choice for living rooms and bedrooms, where tenants expect 2700K or 3000K warm white. If you standardize a building on one color, the S8565 is a common-area lamp, not a dwelling-unit lamp.
3) Does the Satco S8565 render color well enough for retail or inspection work?
It is a 90+ CRI lamp, which puts it above the 80 CRI typical of commodity LED A19s and into the range specified for retail display, healthcare exam areas, paint and finish inspection, and anywhere skin tones or material colors matter. Paired with the 5000K output you get high-fidelity daylight-white light.
4) How many bulbs come in the Satco S8565 order?
S8565 is sold as a 4-pack, so one order unit relights four sockets. The lamps come with a frost finish, which diffuses the LED sources and softens the look in open or shaded fixtures rather than showing hot spots. Each bulb weighs 0.07 lb.
5) Can I mix the S8565 with the dimmable Satco A19 lamps already in my building?
Only on non-dimmed circuits, and only where the color matches. The S8565 is non-dimmable, so it cannot share a dimmer with anything. It is also 5000K at 90+ CRI; if your existing lamps are 2700K or 3000K, the two will read as visibly different colors side by side in the same corridor or room. For a standardization program, keep 5000K on its own group of spaces.
How fast can I get the Satco Lighting S8565 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8565 come with a warranty?
Absolutely. The Satco Lighting S8565 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8565?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8565 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.