You may also like
SATCO Lighting S8677 6.5W, LED MR16, 3000K, 25 degree Beam Angle, GU10 Base, 120V
6.5 Watt - LED MR16 - 3000K - 25 deg. Beam Angle - GU10 base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Product Material:
- Plastic
- CRI:
- 80+
- Product Weight:
- 0.08 lb
- Dimmable:
- Yes-Dimmable
- Lumens:
- 500L
Satco Lighting S8677 – Frequently Asked Questions
1) Will the Satco S8677 LED MR16 fit a GU10 track head, or do I need the pin-base version?
The S8677 uses a GU10 twist-lock base, so it drops into GU10 track heads and recessed trims that take a quarter-turn lamp. It will not fit a GU5.3 or GX5.3 two-pin socket, which is what low-voltage MR16 fixtures use. It also runs on line voltage, 120V, so no transformer is involved. If your fixture has a 12V transformer feeding bi-pin sockets, this is the wrong lamp.
2) Is the Satco S8677 MR16 dimmable on my existing wall dimmer?
The 6.5W GU10 MR16 is a dimmable lamp. Line-voltage dimming is on 120V, so the lamp is driven directly off the dimmer with no transformer in the loop. As with any LED retrofit, an old incandescent-rated dimmer carrying only a few LED lamps can sit below its minimum load and flicker, so an LED-rated dimmer is the safer pairing on a small head count.
3) Is 3000K the right color temperature to match the rest of my fixtures?
3000K is warm white, the color most often used to match halogen accent lighting in hospitality, retail, and residential common areas. It reads warmer than 3500K or 4000K neutral lamps, so mixing it into a run of cooler lamps will be visible. For a whole-building standardization, pick one temperature across every head rather than mixing. Color rendering is 80+ CRI.
4) What exact part number do I order for the Satco 6.5W 3000K GU10 MR16?
Order Satco S8677. That is the 6.5W LED MR16, 3000K, 25 degree beam, GU10 base, 120V, and it is supplied in a white finish. Satco publishes a spec sheet for the lamp if you need the full photometric data for a submittal.
5) What is the housing made of on this Satco MR16, and does that matter in an enclosed trim?
The lamp body is plastic rather than glass or die-cast metal, and the whole lamp weighs 0.08 lb. Light weight helps in older track heads with worn spring clips. On heat, treat it as you would any plastic-body LED and give it the airflow the fixture was designed for.
How fast can I get the Satco Lighting S8677 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8677 come with a warranty?
Absolutely. The Satco Lighting S8677 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8677?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8677 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.