SATCO Lighting S8755 8W LED PL...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.63
Satco Lighting SAT-S8755 8 Watt LED PL Medium base - 2700K - Type B - Ballast Bypass - 920 Lumens - 50000 Average rated hours - 120 deg. Beam Angle - 120-277 Volt

SATCO Lighting S8755 8W LED PL Medium Base, 2700K, Type B, Ballast Bypass, 920 Lumens, 50000 Avg Rated Hours, 120 degree Beam Angle

(No reviews yet) Write a Review

Model: S8755
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.63
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S8755 8W LED PL Medium Base, 2700K, Type B, Ballast Bypass, 920 Lumens, 50000 Avg Rated Hours, 120 degree Beam Angle

8 Watt LED PL Medium base - 2700K - Type B - Ballast Bypass - 920 Lumens - 50000 Average rated hours - 120 deg. Beam Angle - 120-277 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.067-0.029A
Avg Rated Hours:
50000
BAA Compliant:
No
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
83
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
PL
Lens Finish:
Frost
Lensed:
Yes
Lumens:
920L
Operating Frequency:
50/60Hz
Product Type:
PL
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Product Voltage:
120V-277V
Beam Spread Angle:
120
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
8W
Product Weight:
0.24 lb
Location Rating:
Damp

Satco Lighting S8755 – Frequently Asked Questions

1) Does the Satco S8755 LED PL lamp work with an existing CFL ballast, or does the ballast have to be removed?
The S8755 is a Type B ballast bypass lamp, so it runs on line voltage only. The existing CFL ballast has to be removed or bypassed and the socket wired direct to 120-277V. Drop it into a socket that still has a live ballast and it will not work correctly. It runs on 120V through 277V at 50/60Hz, so it covers both residential and commercial line voltages.
2) Can I put the Satco S8755 in a closed ceiling fixture or a jelly jar?
Yes, it is rated for enclosed fixtures, so a closed globe, jelly jar, or sealed ceiling fixture is fine. Burning position is universal, so base up, base down, or horizontal all work.
3) Will the Satco S8755 dim on my existing dimmer switch?
No. This 8W LED PL lamp is non-dimming. On a dimmer it can flicker, buzz, or fail early. For dimmed circuits, pick a lamp specifically listed as dimmable, or put this one on a plain switched circuit.
4) Will the Satco S8755 match the other 2700K lamps in my building?
Color temperature is fixed at 2700K, the warm tone most residential and hospitality spaces standardize on. It is not a CCT selectable lamp, so there is no field switch to set 3000K or 4000K. If your other fixtures run 3500K or 4000K, this one will read noticeably warmer.
5) Does the Satco S8755 qualify for a DLC utility rebate or a Buy American project?
No on both counts. It is not DLC listed, so it will not qualify for rebate programs that require DLC, and it is not BAA compliant, which rules it out of federally funded work carrying Buy American Act requirements. It is FCC compliant.
6) Can I sell or install the Satco S8755 in California?
Satco flags this lamp as non-compliant for California, so it is not suitable for projects subject to the state's lamp regulations. For California work, specify a lamp carrying a compliant designation.
7) What current draw should I figure per lamp when loading a circuit with Satco S8755 PL lamps?
0.067A at the low end of the voltage range down to 0.029A at the high end, at 8 watts each. Use the 120V figure when you are sizing a 120V branch circuit for a bank of these.
8) How long does the Satco S8755 last before relamping?
Rated 50,000 average hours. On a 12 hour per day corridor or common area schedule that is roughly 11 years of service, which is why property managers use ballast bypass LED PLs to get off the CFL relamp and ballast replacement cycle.
How fast can I get the Satco Lighting S8755 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8755 come with a warranty?
Absolutely. The Satco Lighting S8755 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8755?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8755 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!