SATCO Lighting S9153 1W LED, CA8, Clear, 2700K, Candelabra Base, 120V, Carded
1 Watt LED - CA8 - Clear - 2700K - Candelabra base - 120 Volt - Carded
Manufacturer Resources
Product Specs
- Amps:
- 0.008A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- CA8
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 25L
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Glass
- Incandescent Equivalent:
- 11W
- Location Rating:
- Wet
- CRI:
- 80
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 1W
- Product Material:
- Glass
Satco Lighting S9153 – Frequently Asked Questions
1) Can I put the Satco S9153 candelabra LED on a dimmer switch?
No. The S9153 is a non-dimmable lamp. Wire it to a straight on/off switch. Putting it on a dimmer circuit risks flicker, buzz, and early failure, and it will not dim smoothly. If the fixture is on an existing dimmer, either swap the dimmer for a standard switch or pick a lamp specified as dimmable. It is also not a three-way lamp, so it will not step through a three-way socket.
2) Is the Satco S9153 LED bright enough to replace an 11 watt candelabra bulb in a chandelier?
It is rated as an 11W incandescent equivalent, drawing 1 watt and producing 25 lumens at 2700K. That is decorative light, not task light. It suits chandeliers, sconces, and night-light style fixtures where the lamp itself is meant to be seen as a warm accent. If you need a candelabra lamp that actually lights a room, you want a much higher lumen output than 25.
3) Will this Satco LED candle bulb fit my existing candelabra sockets?
The S9153 uses a candelabra base (E12) and runs on 120 volts, so it threads into standard candelabra sockets found on chandeliers, wall sconces, and decorative fixtures. The lamp shape is CA8, the bent-tip candle profile, with a clear glass body. Check the socket is candelabra and not intermediate or medium before ordering a quantity.
4) Can this candelabra LED be used outdoors in a wet location fixture?
Yes. The S9153 carries a wet location rating and is listed for indoor or outdoor use, so it can go in an enclosed porch lantern, post light, or covered entry fixture where the lamp may see moisture. The fixture itself still has to be rated for the location it is mounted in.
5) Does the Satco S9153 have to be installed base up or base down?
Neither. Burning position is universal, so it works base up in a sconce, base down in a chandelier arm, or horizontal in a wall fixture with no effect on how it is rated. That makes it simple to standardize across mixed fixture types in a building.
6) How long do these Satco 1W candelabra LEDs last before they need relamping?
Average rated life is 25,000 hours. For a property manager running lobby or corridor sconces around 12 hours a day, that is roughly five to six years between relamps, which is the main reason to move decorative candelabra sockets off incandescent. Current draw is 0.008A per lamp, so a long chandelier run adds almost nothing to the circuit load.
7) Does this Satco candelabra LED meet California Title 24?
Yes, the S9153 is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualified product, this lamp will not qualify for it.
8) Will the light color match the other warm bulbs already in my building?
The S9153 is fixed at 2700K, the warm white that matches typical incandescent and halogen decorative lamps. It is not a CCT selectable lamp, so there is no switch to set 3000K or 4000K. If the rest of your fixtures are running 3000K or cooler, this one will read noticeably warmer alongside them.
How fast can I get the Satco Lighting S9153 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9153 come with a warranty?
Absolutely. The Satco Lighting S9153 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9153?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9153 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.