SATCO Lighting S9177 0.8W LED, T6, Clear, 2700K, Candelabra Base, 120V, Carded

Yes. The S9177 T6 lamp carries a Wet location rating and is approved for indoor and outdoor use, so an exterior sign cabinet or an enclosed outdoor fixture is within its rating. It runs on 120V line voltage, so no driver or transformer is needed.

No. The S9177 is a non-dimming lamp. Put it on a dimmer and you risk flicker, buzz, or premature failure. If the circuit you are feeding has a dimmer on it, either bypass the dimmer for that leg or pick a lamp that states dimming. It is also not a three-way lamp, so it will not step through levels in a three-way socket either.

It is the LED stand-in for a 1.5W incandescent T6 candelabra sign lamp, drawing 0.8 watts and 0.007 amps at 120V. In a panel of sign or exit sockets that current draw is what lets you lamp a long run without reworking the circuit. The candelabra base means it screws straight into the existing E12 sockets.

Any orientation. The burning position is universal, so base-up, base-down, or horizontal in a marquee or sign cabinet is all acceptable. The lamp is also 360 degree emission, so it throws light evenly around the axis rather than in one direction, which is what you want behind a diffused sign face or in a bare-socket marquee run.

It runs 2700K with an 80 CRI, which is the warm white that reads closest to a standard incandescent. If you are relamping a marquee or a sign panel in stages, mixing 2700K LED with remaining incandescents will not show an obvious color mismatch from across a lobby. It is a fixed color temperature, not a selectable one, so every unit you buy is the same 2700K.

Clear lens, glass. In a sign or marquee application clear is usually what is specified, because the filament-style point source is meant to be visible through an open socket or a clear cabinet face. If the sign has a diffused acrylic face, clear works fine there too since the emission is 360 degrees.

One configuration only, clear at 2700K, ordered as MPN S9177. It ships carded rather than in bulk cartons, which suits counter sale or a maintenance cart more than a palletized relamp.

It is FCC compliant, which is the relevant declaration for a line-voltage LED lamp going into a healthcare, hospitality, or office environment where cheap LED drivers have a history of putting noise on the line. Note it is not DLC listed, so it will not qualify for utility rebate programs that require a DLC entry.

Yes, it is lawful for sale in California, which matters because California title 20 has pulled a number of small-base lamps off the market. Distributors shipping into the state can list it without a compliance flag.