You may also like
SATCO Lighting S9158 1.4W LED, G16 1/2, Clear, 2700K, Medium Base, 120V, Carded
1.4 Watt LED - G16 1/2 - Clear - 2700K - Medium base - 120 Volt - Carded
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.012A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- G16.5
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 36L
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass
- Incandescent Equivalent:
- 15W
- Location Rating:
- Wet
- CRI:
- 80
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 1.4W
Satco Lighting S9158 – Frequently Asked Questions
1) Can the Satco S9158 G16 1/2 LED bulb be used on a dimmer?
No. The S9158 is a non-dimmable lamp. Put it on a dimmer circuit and you can expect flicker, buzz, or early failure. If the fixture is on a dimmed circuit, either lock the dimmer at full output, swap the dimmer for a standard switch, or specify a dimmable G16 1/2 LED instead.
2) How bright is the Satco S9158 compared to the incandescent it replaces?
It puts out 36 lumens at 1.4 watts, rated as a 15 watt incandescent equivalent. That is decorative or accent light, not task light. If you are replacing a 40W or 60W lamp in a vanity or fixture people read by, this will be noticeably dimmer and you want a higher-output globe.
3) Can I use this LED globe bulb outdoors or in a covered porch fixture?
Yes, it carries a wet location rating and is listed for indoor or outdoor use, so exterior sconces, porch fixtures, and covered entries are fair game.
4) What color of light does the Satco S9158 give, and will it match the other bulbs in my fixture?
2700K, the warm white tone that reads the same as a standard incandescent. CRI is 80. If the adjacent lamps in a multi-socket fixture are also 2700K you will not see a color shift; mixing it with 3000K or 4000K lamps in the same fixture will look obviously off. Color temperature is fixed, not selectable.
5) Does this clear G16 1/2 bulb throw light in all directions like the incandescent globe it replaces?
Yes, 360 degree beam spread with a clear lens, so it lights evenly in every direction the way a clear incandescent globe does. That also means the LED emitters are visible through the glass, which is what you want in an exposed-bulb fixture but can glare in a fixture that leaves the lamp at eye level.
6) How long does the Satco S9158 LED last, and how many can I run on one circuit?
Rated 25,000 hours average life. Each lamp draws 0.012 amps at 120V, so lamp count is effectively never the limiting factor on a branch circuit; for a vanity strip or a marquee run of these, the wiring and fixture rating decide the count, not the load.
7) Does the Satco S9158 meet California Title 24 for a multifamily or commercial job?
Yes, it is Title 24 compliant and FCC compliant. Worth noting for spec work that it is not DLC listed, so it will not qualify under utility rebate programs that require a DLC listing.
8) Will this Satco LED work in a 3-way lamp socket?
Not as a 3-way lamp. The S9158 is single-output only. In a 3-way socket it will light on one or two of the switch positions and stay dark on the others. For a 3-way table lamp, order a lamp built for 3-way switching.
9) Is the Satco S9158 globe bulb glass or plastic?
Glass, with a clear lensed envelope. That matters for cleaning crews and for fixtures where a plastic lens would yellow over time, and it means normal handling care applies on a ladder.
How fast can I get the Satco Lighting S9158 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9158 come with a warranty?
Absolutely. The Satco Lighting S9158 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9158?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9158 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.