You may also like
SATCO Lighting S9753 10W LED HID Replacement, 5000K, Medium Base, 12-24V DC Only
10 Watt LED HID Replacement - 5000K - Medium base - 12-24V DC Only
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.833-0.417A
- Avg Rated Hours:
- 50000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White/Grey
- Lamp Filament:
- LED
- Lamp Shape:
- Corncob
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 1200L
- Operating Frequency:
- 50Hz
- Product Type:
- Corncob
- Three-Way:
- No
- Warranty:
- 5 Year Limited - Hi-Pro
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Aluminum / Plastic
- Incandescent Equivalent:
- 90W
- Location Rating:
- Damp
- CRI:
- 80+
- Subcategory:
- LED
- Title 24 Compliant:
- No
- Bulb Type:
- LED
- Product Voltage:
- 12V-24V
- Beam Spread Angle:
- 330
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 10W
- Product Weight:
- 0.55 lb
- Product Material:
- Aluminum / Plastic
Satco Lighting S9753 – Frequently Asked Questions
1) Can the Satco S9753 LED corncob bulb run on 120V line voltage?
No. The S9753 is a 12V-24V DC only lamp. Wiring it to 120V AC line voltage will destroy it. Use it on battery banks, solar systems, RV and marine 12V or 24V DC circuits, or low-voltage off-grid fixtures. If the socket is on standard household AC, you need a line-voltage lamp instead.
2) What current draw should I size my 12V DC circuit for with the Satco S9753?
Draw is 0.833A at 12V and 0.417A at 24V. That is the number to use when you are sizing wire, fusing a branch, or budgeting amp-hours off a battery bank for multiple lamps.
3) Can this Satco DC corncob bulb go in a sealed or enclosed fixture?
Yes, it is an enclosed rated lamp, so a closed jelly-jar, globe, or sealed vandal fixture is fine. It also carries a damp location rating, which covers covered porches, barns, and sheltered exterior housings but not direct rain or submersion.
4) How much light does the 10W Satco S9753 corncob put out, and what is it replacing?
1200 lumens at 10 watts, which Satco rates as a 90W incandescent equivalent. Color is 5000K daylight white with 80+ CRI, so it reads cool and neutral rather than warm.
5) Will the Satco S9753 work on a dimmer?
No. The S9753 is non-dimmable and is not a three-way lamp. Put it on a dimmed low-voltage circuit and you will get flicker, buzz, or early failure. For DC installs where you want level control, run it on a straight switched circuit.
6) Can I mount this corncob LED base-up or sideways in a fixture?
Burning position is universal, so base-up, base-down, or horizontal all work. The 330 degree beam spread means it throws light nearly all the way around the lamp body, which suits open shades and jelly jars more than a fixture that needs a tight downward beam.
7) Does the Satco S9753 qualify for DLC utility rebates or California Title 24?
No on both counts. The S9753 is not DLC approved and is not Title 24 compliant, so do not spec it where a rebate program or a California residential lighting requirement is driving the selection. It is FCC compliant.
8) How long does the Satco 10W DC corncob last, and what is it built from?
Rated at 50,000 average hours. The base is aluminum and plastic with a white and grey housing, and the lens is clear. On a fleet of remote or off-grid fixtures that hour rating is the number that decides how often a tech has to climb.
9) Is the 5000K color on the S9753 switchable to a warmer temperature?
No, the color is fixed at 5000K. There is no CCT selection switch on this lamp, so if you are matching warmer fixtures elsewhere in the building you need a different lamp rather than adjusting this one.
How fast can I get the Satco Lighting S9753 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9753 come with a warranty?
Absolutely. The Satco Lighting S9753 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9753?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9753 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.