Schaub 10021 Baker Collection ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$39.00
$23.01
Schaub 10021 4" Center to Center Baker Edge Pull Schaub 10021

Schaub 10021 Baker Collection 4" CTC Edge Pull in Solid Brass with 2" Projection

(No reviews yet) Write a Review

Model: 10021-MB
From the Baker Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$39.00
$23.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 10021 Baker Collection 4" CTC Edge Pull in Solid Brass with 2" Projection

The Schaub 10021 is a contemporary edge pull from the Baker collection, designed for cabinet doors and drawers requiring a 4" center-to-center mounting span. Crafted from solid brass, this pull measures 5-1/4" overall with a matching 5-1/4" base dimension and a 2" projection, finished in Brushed Nickel for a clean, contemporary look. Mounting hardware includes #8 x 5/8" screws sized for standard cabinet door and drawer applications. This Schaub Baker pull is categorized within the Pulls and Push Plates subcategory of Schaub's Cabinet Hardware product line, suited for residential installations.

Key Features

  • Center-to-Center Spacing: Precise 4" center-to-center mounting holes allow accurate, repeatable installation across matching cabinetry.
  • Overall Length & Base Dimensions: Measures 5-1/4" overall with a 5-1/4" base dimension for a proportional, finished appearance on doors and drawers.
  • 2" Projection: Projects 2" from the door or drawer face for a comfortable, secure grip during everyday use.
  • Solid Brass Construction: Built from solid brass for exceptional durability and long-term performance in daily residential use.
  • Contemporary Baker Collection Styling: Clean-lined edge pull design from the Baker collection complements modern and transitional cabinetry.
  • Brushed Nickel Finish: A versatile, low-sheen finish that resists fingerprints and coordinates with a wide range of cabinetry, fixtures, and appliances.
  • Mounting Hardware: Includes #8 x 5/8" screws sized for proper installation into cabinet doors and drawers.

Technical Specifications

  • MAP Policy: Yes
  • Product Projection: 2"
  • (CTC) Center-to-Center: 4"

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture and Built-Ins
  • Home Office Cabinetry
  • Laundry Room Cabinets
  • Closet and Storage Systems
  • Residential Remodeling Projects

Why Schaub Baker?

Schaub Baker collection pulls pair solid brass construction with clean, contemporary lines for hardware that performs as well as it looks. The 10021 edge pull's precise 4" center-to-center spacing, 2" projection, and durable Brushed Nickel finish make it a dependable choice for kitchens, baths, and furniture updates where consistent quality matters.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Pulls and Push Plates
Collection:
Baker
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
Commercial/Residential:
Residential
MAP Policy:
Yes
Overall:
5-1/4"
Thread / Screw Size:
#8 x 5/8
Product Function:
Edge Pull
Product Dimension:
5-1/4"
Product Projection:
2"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
4"
Department:
Door Hardware

Schaub 10021-MB – Frequently Asked Questions

1) My existing holes are 3 inch or 3-1/2 inch centers. Can I still use the Schaub 10021?
No. The 10021 is fixed at 4 inch center-to-center, so 3 inch or 3-1/2 inch holes won't line up and you'd be filling and redrilling the fronts. At 3 inch ctc, the Trimco 553 Series drawer pull matches. At 3-1/2 inch, the Deltana SBP35 is a 3-1/2 inch solid brass bar pull, and the Trimco 562 Series is offered in 3-1/2 inch as well as 4 inch and 96mm.
2) What screws come with the Schaub Baker 10021 pull, and will they work on a thicker drawer front?
The 10021 uses #8 x 5/8 inch machine screws. That length suits a standard 3/4 inch drawer front or door. If you're mounting through a thicker front, a doubled-up front, or a drawer box with an applied face, 5/8 inch won't reach and you'll need longer #8-32 machine screws, which are sold by the box at any hardware counter.
3) How much space do I need above and beside the pull? What is the footprint of the Schaub 10021?
Plan for 5-1/4 inches of run for the pull body and 2 inches of clearance off the face for the projection. On a drawer beside a wall return, an inside corner, or an appliance panel, that 2 inch stand-off is the number that decides whether the drawer can open past the obstruction and whether knuckles clear. The mounting holes sit 4 inches apart inside that 5-1/4 inch length.
4) Is the Schaub Baker 10021 pull tough enough for a rental unit or hotel casework?
Schaub lists the 10021 as residential. It's solid brass, not plated zinc, so the body itself holds up, but for high-turnover multi-family or hospitality casework a commercial-rated pull is the safer call. Two solid brass alternatives ZenSupply carries are the Deltana SBP35 Modern Square Bar Pull, which Deltana describes as heavy-duty, and the Trimco 562 Series drawer pull, which is offered in 4 inch ctc so it lands on the same hole pattern as the 10021.
5) The 2 inch projection on the Schaub 10021 is too much for my cabinet. What else could I use at the same hole spacing?
For a lower-profile pull on the same 4 inch center-to-center holes, the Omnia 1968/102 is a forged solid brass modern pull at 4 inch ctc. If you can redrill, the Omnia 1969 and 1971 come in at 1-3/16 inch projection and the Omnia 1970 at 1-1/4 inch, all forged solid brass. Any of those sit far closer to the face than the 10021's 2 inches, which matters at inside corners and next to appliance panels.
6) What is the closest 4 inch center to center solid brass alternative to the Schaub 10021 Baker pull?
The Omnia 1968/102 is the nearest match on the two numbers that decide a drop-in swap: it is a forged solid brass cabinet pull with 4 inch center to center spacing, the same spacing the Schaub 10021 Baker pull uses, and the Schaub is solid brass as well. Because the hole spacing agrees, it lands on existing 4 inch bores without redrilling the door or drawer front. What changes is the form: the Schaub 10021 is an edge pull with a 5-1/4 inch overall length and a 2 inch projection, so confirm the standoff and length suit the opening before standardizing a run of cabinets on one or the other.
7) Which pull works if the 4 inch hole spacing is wrong and the boring can be changed?
Two spacings sit on either side of the Schaub 10021 Baker pull's 4 inch center to center. The Trimco 553 Series drawer pulls are 3 inch center to center, and the Deltana SBP35 modern square bar pull is 3-1/2 inch in heavy-duty solid brass. Both require their own boring rather than reusing a 4 inch pattern. For a mixed casework package where some fronts are already bored at 4 inch and some are not, the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm center to center within a single series, so one series can follow more than one existing pattern.
8) Can a cabinet knob be used in place of the Schaub 10021 Baker pull?
No, not without new boring. The Schaub 10021 Baker pull mounts on two holes at 4 inch center to center. Single-post knobs such as the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor Collection round ring cabinet knob at 1-1/4 inch diameter, and the Blackcomb Collection square cabinet knob at 25mm diameter each take one hole, so a swap leaves the second 4 inch bore exposed. Knobs are the choice when the fronts are being made new or the old holes are being filled, not when an existing 4 inch pattern has to be reused.
9) What is an edge pull and where does the Schaub 10021 Baker pull get mounted?
The Schaub 10021 Baker is an edge pull, so it mounts on the edge or face of a door or drawer front and gives you a finger grip rather than a bar you wrap your hand around. It's a residential-duty cabinet pull in solid brass, contemporary in style, with 4 inch center-to-center screw spacing and a 5-1/4 inch overall length. Projection is 2 inches, so it stands off the surface enough to hook fingers behind.
10) Is the Schaub Baker 10021 solid brass all the way through or just brass plated?
Solid brass is the base material, in every one of the six finishes. That's what lets Unlacquered Brass work as a living finish, there's brass under the surface rather than plating over pot metal. It also means the pull can be handled hard without the finish flaking off a soft substrate at the edges.
11) Should I pick an edge pull like the Schaub 10021 or a standard bar pull for my cabinets?
An edge pull is the right call when the pull needs to read as a finger grip on the edge of a door or drawer front rather than a bar standing off the face, common on contemporary slab-front cabinetry. Go with a bar pull when you want a full hand grip or a more traditional profile, and ZenSupply carries the Emtek Bar Cabinet Pull in the Schaub Collection if you want to stay in the same design family. Emtek also lists Alexander and Art Deco cabinet pulls under the Schaub Collection for a period look.
12) What has a shallower standoff than the Schaub 10021 Baker pull for a tight walkway or galley run?
The Schaub 10021 Baker pull projects 2 inch off the face. Where that reach into a walkway is more than the opening allows, the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass at 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection. All three sit closer to the door face, which matters on a galley run, an island end, or any cabinet beside a traffic path where a hip or a cart catches the hardware.
13) Is there a steel pull to consider instead of the solid brass Schaub 10021 Baker pull?
Yes. The Schaub 10021 Baker pull is solid brass, which carries the plated and living finishes such as unlacquered brass and satin brass. Where a steel body suits the application better, the Orca Hardware CK-12001 T-pull bar is steel in satin nickel with a 2 inch bar width. The two differ in base material and in form, so pick by what the fronts already wear: a run finished in brushed nickel or matte black hardware reads differently next to a satin nickel steel bar.
14) How do the Emtek Schaub Collection pulls relate to the Schaub 10021 Baker pull?
They are the same design house reaching a different set of shapes. The Schaub 10021 belongs to the Baker collection in a contemporary style with an edge pull function. Alongside it, Emtek carries the Schaub Collection as cabinet knob and pull offerings in several series: the Emtek 8405 in the Emtek SELECT series, the Alexander series, the Art Deco series, and the Bar series. If the Baker profile is close but not the shape the elevation calls for, those series are where to look next without leaving the same design family.
15) For a multi-family or hospitality casework package, which pull covers the most existing hole patterns?
Where a property is retrofitting cabinets that were bored by different installers over the years, the Trimco 562 Series drawer pulls span 3-1/2 inch, 4 inch, and 96mm center to center in one series, so a single specification follows the boring already in the fronts. The Schaub 10021 Baker pull is a fixed 4 inch center to center with a 5-1/4 inch overall length, which suits a standardized package where every front is bored the same. The Trimco 553 Series is the choice where the existing pattern is 3 inch.
16) Can I mix the Schaub 10021 with knobs from the same Baker collection on the same kitchen?
The 10021 belongs to Schaub's Baker collection, so it's built to sit alongside the rest of that collection in the same finish, the usual approach being pulls on drawers and knobs on doors. When you're mixing, matching the finish code matters more than matching the collection, order every piece in the same finish designation at once rather than assembling a nickel or brass finish from separate lines.
How fast can I get the Schaub 10021-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 10021-MB come with a warranty?
Absolutely. The Schaub 10021-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 10021-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 10021-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!