Schaub 10022 Baker Collection ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$45.00
$26.37
Schaub 10022 5" Center to Center Baker Edge Pull Schaub 10022

Schaub 10022 Baker Collection Edge Pull, 5" Center-to-Center, Solid Brass, 2" Projection

(No reviews yet) Write a Review

Model: 10022-UNBR
From the Baker Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$45.00
$26.37
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 10022 Baker Collection Edge Pull, 5" Center-to-Center, Solid Brass, 2" Projection

The Schaub 10022 Baker Collection Edge Pull brings contemporary style to cabinetry with a 5" center-to-center span, 2" projection, and a 6-1/4" overall length. Crafted from solid brass and finished in Brushed Nickel, this edge pull suits modern cabinet doors and drawers where a clean, low-profile pull is preferred. As part of Schaub's Cabinet Pulls product line, this residential-grade hardware is designed for straightforward installation using the included #8 x 5/8" mounting screws.

Key Features

  • Center-to-Center Spacing: 5" center-to-center mounting suits standard cabinet drawer and door applications.
  • Compact Projection: 2" projection provides a low-profile edge pull that sits close to the cabinet surface.
  • Overall Dimensions: 6-1/4" overall length and 6-1/4" base dimension for consistent, balanced proportions.
  • Solid Brass Construction: Solid brass base material delivers durability and long-lasting performance in daily use.
  • Brushed Nickel Finish: Contemporary Brushed Nickel finish complements a wide range of cabinetry styles and interior palettes.
  • Baker Collection Design: Part of the Baker Collection, featuring a contemporary edge pull silhouette with clean lines.
  • Included Mounting Hardware: Mounting screws sized #8 x 5/8" are included for straightforward installation.
  • Residential Cabinetry Compatibility: Designed for residential applications, making it well suited to kitchen and bathroom cabinetry upgrades.

Certifications & Compliance

  • California Proposition 65 Warning applies to this product for California residents.

Technical Specifications

  • MAP Policy: Yes
  • Product Projection: 2"
  • (CTC) Center-to-Center: 5"

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Residential Remodels
  • Contemporary Interior Design Projects
  • Drawer and Cabinet Door Upgrades

Why Schaub 10022?

Schaub Baker Collection hardware is crafted from solid brass for lasting durability and a substantial feel. The 10022 Edge Pull's contemporary design and Brushed Nickel finish make it a versatile choice for homeowners and designers seeking clean, modern cabinet hardware suited to kitchens, bathrooms, and custom furniture projects.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Pulls and Push Plates
Collection:
Baker
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
Commercial/Residential:
Residential
MAP Policy:
Yes
Overall:
6-1/4"
Thread / Screw Size:
#8 x 5/8
Product Function:
Edge Pull
Product Dimension:
6-1/4"
Product Projection:
2"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
5"
Department:
Door Hardware

Schaub 10022-UNBR – Frequently Asked Questions

1) Will the Schaub 10022 fit my existing cabinet pull holes?
Only if your existing holes are drilled 5 inches apart. The 10022 Baker is a two-hole pull on 5 inch centers, so it drops onto an opening already bored at 5 inches and covers nothing wider or narrower. 5 inch centers are not one of the common older cabinet spacings (3 inch and 3-1/2 inch are), so on a retrofit measure hole to hole before you order. The body is 6-1/4 inches overall, which gives you about 5/8 inch of pull past each screw hole to hide minor drilling slop, not a mis-spaced pair.
2) What screws come with the Schaub 10022 Baker pull, and will they work on my drawer front?
The 10022 takes #8 x 5/8 machine screws, which is the standard cabinet hardware thread. That 5/8 inch length is sized for a typical 3/4 inch cabinet door or drawer front. If you're mounting through a thicker front, a doubled-up drawer face, or a front with an applied panel, the 5/8 screw will bottom out and you'll need a longer #8-32 screw to reach.
3) Can I use the Schaub 10022 Baker pull in a commercial building or apartment turn?
Schaub rates the 10022 Baker as residential cabinet hardware. For a single-family, condo, or apartment kitchen and bath package it's the right class of part. For heavy commercial cabinetry, a school casework job, or anywhere the cabinet hardware is taking institutional traffic, spec a pull built for that duty instead. Deltana's SBP35 square bar pull is listed here as a heavy-duty solid brass option, and Trimco's 553 and 562 Series drawer pulls are commercial door-hardware-brand pulls.
4) How much does the Schaub 10022 stick out from the cabinet face, and will it catch in a tight galley?
Projection on the 10022 Baker is 2 inches off the mounting surface. That's a fair amount of stand-off for a cabinet pull, so in a narrow galley, a pass-through, or on a drawer bank you walk past sideways, measure your clearance first. If 2 inches is too much, the Omnia 1969 and 1971 are listed at 1-3/16 inch projection and the Omnia 1970 at 1-1/4 inch, all forged solid brass, so they sit noticeably closer to the front.
5) I need a shorter pull than the 5 inch Baker for small drawers. What else is there?
The 10022 is a 5 inch center-to-center pull, so on a small drawer or a narrow door front it will look oversized and may not even fit the stile. For tighter spacing, the Trimco 553 Series is a 3 inch ctc drawer pull, the Trimco 562 Series comes in 3-1/2 inch, 4 inch, and 96mm ctc, the Deltana SBP35 is a 3-1/2 inch square bar pull, and the Omnia 1968/102 is a forged solid brass pull on 4 inch centers. If a pull won't fit at all, Orca's Bachelor Collection knobs are 1-1/4 inch round with a single screw hole.
6) What is the closest alternative to the Schaub 10022 Baker edge pull if I need a solid brass pull in a similar contemporary look?
The Schaub 10022 Baker edge pull is solid brass in a contemporary style with 5 inch center to center and a 6-1/4 inch overall length. Among comparable solid brass contemporary cabinet pulls, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center to center spacing, so it is the nearest match in material and styling but drills on a different hole pattern. If the existing 5 inch bore must be reused, the 10022 is the one that lands on it.
7) I have drawers bored at 3 inch and 3-1/2 inch centers - what pull fits those instead of the 5 inch Baker?
The Schaub 10022 Baker edge pull is fixed at 5 inch center to center, so it will not land on a shorter existing bore. For 3 inch centers, the Trimco 553 series drawer pull is made at 3 inch ctc. For 3-1/2 inch or 4 inch centers, the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm ctc options, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Match the ctc to the existing holes and you avoid re-drilling the drawer face.
8) The Baker edge pull projects 2 inches - what pulls sit closer to the door face in a tight walkway?
The Schaub 10022 Baker edge pull has a 2 inch projection, which is what gives it a full hand grip. Where clearance is tight - a galley kitchen, an island aisle, a corridor of lockers - the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass at 1-3/16 inch projection. All three keep the brass construction while standing off the face by roughly half as much.
9) What is an edge pull and where does the Schaub 10022 Baker mount?
An edge pull mounts on the face of a door or drawer front and gives you a recessed finger grip rather than a bar you wrap your hand around. The Schaub 10022 Baker is a contemporary-style solid brass edge pull, 6-1/4 inches overall with 5 inch center-to-center screw spacing and a 2 inch projection. It's the pull you reach for on a flat slab front where a full bar pull would look heavy, or on a sliding or pocket-style cabinet front where a protruding handle gets in the way.
10) Is the Schaub 10022 solid brass all the way through, or plated?
Solid brass is the base material on the 10022 Baker, not a plated zinc or steel casting. That matters two ways: it holds thread better where a screw bears on the pull, and it's what makes the Unlacquered Brass version work the way it's meant to. Unlacquered brass has no clear coat, so it darkens and patinas with handling instead of holding one flat color. If you want a finish that stays as-shipped, take one of the coated options instead.
11) How wide does my cabinet door or drawer front need to be for a Schaub 10022?
Plan on at least 6-1/4 inches of usable width or height, because that's the overall length of the 10022 Baker. Mounted vertically on a door, the stile has to clear the 6-1/4 inch body; mounted horizontally on a drawer, the front needs the same. The screws land 5 inches apart within that, centered, leaving roughly 5/8 inch of pull past each hole. On a narrow front, a shorter-center pull or a knob is the better call.
12) Emtek sells a Schaub Collection - is that the same thing as the Schaub 10022 Baker pull?
They share the Schaub name but they are not the same part. The Schaub 10022 is the Baker collection edge pull, solid brass, 5 inch center to center. Emtek's Schaub Collection is a separate line of cabinet knobs and pulls that includes the Emtek 8405 in the Emtek SELECT series, the Emtek Alexander, the Emtek Art Deco, and the Emtek Bar cabinet pull, each its own series. If a spec or a prior order calls out Baker at 5 inch ctc, order the 10022 rather than substituting from the Emtek line, because the Emtek parts are different series with their own designs.
13) Can I mix knobs with the Schaub 10022 Baker pull on the same run of cabinets?
Yes - a common layout is pulls on drawers and knobs on doors. The Schaub 10022 Baker edge pull is a two-hole pull at 5 inch center to center taking #8 x 5/8 screws. Knobs bore a single hole instead, so they are not a drop-in for the 10022's two holes: the Orca Hardware CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the CK-16030 is a round ring knob at 1-1/4 inch diameter, and the CK-17025 is a square knob at 25mm diameter. Plan the knob locations on undrilled doors, not on faces already bored for the pull.
14) Is the Schaub 10022 Baker pull the right choice for a high-traffic commercial casework job?
The Schaub 10022 Baker edge pull is designated residential, in solid brass with a 2 inch projection. For commercial casework and heavier duty cycles, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. Those two are built for harder use; the 10022 suits residential kitchens, baths, and unit turns where the Baker look is the point.
15) I need to match satin nickel hardware already installed - what are my options alongside the Schaub 10022?
The Schaub 10022 Baker edge pull comes in Brushed Nickel, Polished Nickel, Satin Brass, Unlacquered Brass, Gun Metal, and Matte Black, so brushed nickel is the closest read to a satin nickel run. If the run must be an exact satin nickel, the Orca Hardware CK-12001 T-pull bar is supplied in satin nickel, though it is a steel bar pull with a 2 inch bar width rather than a brass edge pull. For a whole-kitchen refit it is usually cleaner to carry one finish family across every pull than to blend two.
16) Will an SDC SP50 spindle work in place of the Schaub 10022 pull?
No. The Schaub 10022 is a Baker edge pull for cabinetry, solid brass, 5 inch center to center, fastened with #8 x 5/8 screws. The SDC SP50 is a 50mm spindle used in door controls - it is a lock trim component, not a cabinet pull, and there is no hole pattern or grip in common. If a takeoff pairs the two, they are covering different scopes on the job.
How fast can I get the Schaub 10022-UNBR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 10022-UNBR come with a warranty?
Absolutely. The Schaub 10022-UNBR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 10022-UNBR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 10022-UNBR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!