Schaub 10034 Cafe Modern Oval ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$63.00
$36.47
Schaub 10034 8-3/8" Cafe Modern Oval Slot Cabinet Pull Schaub 10034

Schaub 10034 Cafe Modern Oval Slot Cabinet Pull, Solid Brass, 8-3/8" Overall, 8" Center to Center, 1-1/8" Projection

(No reviews yet) Write a Review

Model: 10034-SB
From the Cafe Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$63.00
$36.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 10034 Cafe Modern Oval Slot Cabinet Pull, Solid Brass, 8-3/8" Overall, 8" Center to Center, 1-1/8" Projection

The Schaub 10034 Cafe Modern Oval Slot Cabinet Pull brings a clean, contemporary profile to kitchen and bath cabinetry as part of the Cafe collection. Crafted from solid brass and finished in Vintage Brass, this pull measures 8-3/8" overall with an 8" center-to-center mounting span and a 1-1/8" projection from the surface, giving it a substantial feel without overwhelming smaller drawer fronts. A compact 3/8" base keeps the hardware profile streamlined against the door or drawer face, and the pull includes #8-32 screws sized for standard cabinet and drawer installations. The oval slot silhouette offers a sleek, modern alternative to traditional bar pulls, making it well suited to contemporary kitchen and bath remodels.

Key Features

  • Overall Length: Measures 8-3/8" end to end for a substantial, comfortable grip on cabinets and drawers.
  • Center to Center Spacing: 8" center-to-center mounting dimension for straightforward installation on standard cabinet drilling.
  • Projection: Extends 1-1/8" from the mounting surface, providing ample clearance for everyday use.
  • Base Dimensions: Compact 3/8" base footprint keeps the hardware profile streamlined against the door or drawer face.
  • Solid Brass Construction: Built from solid brass for long-term durability and a substantial, quality feel in daily use.
  • Vintage Brass Finish: Distinctive Vintage Brass finish complements the Cafe collection's contemporary aesthetic and resists everyday wear.
  • Modern Oval Slot Design: Sleek oval slot profile delivers a clean, contemporary look suited to modern kitchens and baths.
  • Included Hardware: Comes with #8-32 screws sized for standard cabinet and drawer installations, simplifying setup.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents.

Technical Specifications

  • MAP Policy: Yes
  • (CTC) Center-to-Center: 8"

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Kitchen Islands
  • Custom Furniture Pieces
  • Pantry and Utility Doors
  • Residential Remodels and Renovations
  • New Home Construction

Why Schaub 10034?

Schaub's Cafe collection pairs solid brass construction with a Vintage Brass finish for hardware that looks distinctive and performs reliably over years of daily use. The 10034 pull's modern oval slot design and precise 8" center-to-center dimension, paired with its 8-3/8" overall length and 1-1/8" projection, make it a dependable choice for cabinetry projects seeking contemporary style backed by quality materials and straightforward installation.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Cafe
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
Commercial/Residential:
Residential
MAP Policy:
Yes
Overall:
8-3/8"
Thread / Screw Size:
#8-32 Screw
Product Function:
Cabinet Pull
Product Dimension:
3/8"
Product Projection:
1-1/8"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 10034-SB – Frequently Asked Questions

1) What else can I use if I need a shorter Schaub-style modern pull for the smaller drawers in the same kitchen?
The Cafe 10034 is only offered at the 8 inch center-to-center size, so mixing sizes across a run means a second product. Emtek carries the Schaub Collection under its SELECT cabinet program (model 8405), which is the closest same-family route. From other brands, the Omnia 1968/102 is a modern forged solid brass pull at 4 inch center-to-center, and the Deltana SBP35 is a solid brass modern square bar pull at 3-1/2 inches. All three are solid brass, so the material read stays consistent with the Cafe even though the profiles differ.
2) What is a comparable modern cabinet pull if the Schaub 10034 Cafe oval slot pull is not the right look?
The Schaub 10034 is a solid brass Cafe collection pull in a contemporary style with an 8 inch center to center and 1-1/8 inch projection. For a similar modern solid brass pull in a different profile, Omnia offers the 1968/102 modern cabinet pull in forged solid brass with 4 inch center to center spacing, the 1969 modern pull in forged solid brass with 1-3/16 inch projection, the 1970 with 1-1/4 inch projection, and the 1971 with 1-3/16 inch projection. All four are forged solid brass like the Schaub, so the trade is profile and spacing rather than material. If the run of cabinetry is already drilled on 8 inch centers, confirm the Omnia spacing before you order, since the 1968/102 is a 4 inch center to center part.
3) Can an Orca Hardware Bachelor knob be used in place of the Schaub 10034 cabinet pull?
No, not as a drop-in. The Schaub 10034 is a pull mounted on two #8-32 screws at 8 inch centers. The Orca Hardware CK-15030 round Bachelor knob and CK-16030 round ring Bachelor knob are both 1-1/4 inch diameter cabinet knobs, and the CK-17025 Blackcomb square knob is a 25mm diameter cabinet knob. A knob takes a single center bore, so swapping one in over an existing 8 inch pull layout leaves two open holes in the door or drawer front. Knobs are a reasonable choice on new or undrilled fronts, or on small doors where an 8-3/8 inch overall pull is too large for the stile.
4) What should I use instead of the Schaub 10034 on a small drawer where an 8 inch center to center pull will not fit?
The Schaub 10034 measures 8-3/8 inches overall on 8 inch centers, which suits a tall door or a wide drawer bank. For narrow drawers, Trimco makes the 553 series drawer pull at 3 inch center to center and the 562 series drawer pull with 3-1/2 inch, 4 inch, and 96mm center to center options. Deltana also offers the SBP35 modern square bar pull at 3-1/2 inches in heavy-duty solid brass, which keeps the solid brass material of the Schaub in a much shorter length.
5) How much does the Schaub Cafe 10034 pull stand off the cabinet door, and will fingers fit behind it?
Projection is 1-1/8 inches from the face of the door to the outside of the grip, with a 3/8 inch bar section. That leaves roughly three quarters of an inch of clear knuckle room behind the grip, enough for a gloved hand on a kitchen or vanity drawer. Worth checking on inset doors in a tight galley or against an adjacent appliance panel, since 1-1/8 inches of stand-off is on the deeper side for a slim pull.
6) What finishes does the Schaub 10034 Cafe pull come in?
Eight finishes: Brushed Nickel, Polished Nickel, Satin Brass, Vintage Brass, Unlacquered Brass, Matte Black, Matte White, and Gun Metal. Unlacquered Brass is the one to think twice about on a fleet job, since it's a living finish that will darken and patina with handling rather than staying uniform. If you need every unit to look the same in year three, Satin Brass or Vintage Brass hold their appearance.
7) Is the Schaub Cafe pull rated for commercial use or is it a residential product?
Schaub lists the Cafe 10034 as residential. It's a decorative solid brass pull for kitchens, baths, and millwork, not a specified hardware item for a high-traffic institutional casework package. For a school, hospital, or heavy MRO casework job, a steel utility pull such as the Orca Hardware CK-12001 T-Pull bar is the direction to look.
8) Is the Emtek Select Schaub collection pull the same thing as the Schaub 10034?
They are related but not the same part. Emtek sells the 8405 Select cabinet pull in the Schaub collection, along with the Alexander, Art Deco, and Bar cabinet pulls, all under the Schaub collection and all catalogued as a cabinet knob or pull. The Schaub 10034 is the Cafe collection modern oval slot pull, a distinct design with a 3/8 inch base dimension and a 1-1/8 inch projection. If a designer specified a Schaub collection pull by the Emtek series name, order against that series name rather than assuming the Cafe oval slot profile matches it.
9) For a multi-family or hospitality cabinet package, does the Schaub 10034 or a steel bar pull fit the application better?
The Schaub 10034 is a solid brass pull classified for residential use, which covers apartment kitchens, unit casework, and hospitality millwork. Where a steel pull is preferred, the Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel. The Schaub is available in eight finishes including brushed nickel, polished nickel, satin brass, unlacquered brass, vintage brass, gun metal, matte black, and matte white, so it gives a facility standardizing across many units more finish choices to match existing hardware; the Orca CK-12001 is the option when the specification calls out steel construction.
10) How does the Schaub Cafe oval slot pull differ from a plain round bar pull?
The Cafe grip is a flat oval slot profile with a 3/8 inch section, not a round tube. It reads flatter against the door and gives a squared-off contemporary line, where a round bar pull like the Emtek Bar Cabinet Pull or the Omnia 1969 gives a softer cylindrical grip. Grip comfort is the practical difference: a 3/8 inch flat section is a fingertip pull, a round bar fills the hand more.
11) I need matching hardware across a whole kitchen. Does the Schaub Cafe come as a collection?
Cafe is a Schaub collection, so the 10034 pull is part of a coordinated family rather than a one-off casting. Specify the same finish code across every piece you order, since the eight finishes here include close neighbors, Satin Brass, Vintage Brass, and Unlacquered Brass will not read the same next to each other even though all three are brass tones.
How fast can I get the Schaub 10034-SB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 10034-SB come with a warranty?
Absolutely. The Schaub 10034-SB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 10034-SB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 10034-SB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!