Schaub 256 Siena Cabinet Pull ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$45.00
$29.99
Schaub 256 8" Center to Center Siena Cabinet Pull

Schaub 256 Siena Cabinet Pull with 8" Center to Center Spacing and 1-3/8" Projection

(No reviews yet) Write a Review

Model: 256-ABZ
From the Siena Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$45.00
$29.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 256 Siena Cabinet Pull with 8" Center to Center Spacing and 1-3/8" Projection

The Schaub Siena Cabinet Pull brings a rustic style to kitchen and bathroom cabinetry with a zinc base material built for everyday use. This cabinet pull features 8" center to center mounting, an overall length of 8-3/4", a 5/8" base dimension, and a 1-3/8" projection from the door or drawer front for a comfortable, secure grip during daily operation.

Key Features

  • Center to Center Spacing: 8" center to center mounting matches standard drawer and cabinet door hole patterns for straightforward installation.
  • Overall Length: 8-3/4" total length paired with a 5/8" base dimension gives this pull a substantial presence on cabinetry.
  • Comfortable Projection: 1-3/8" projection provides ample clearance for a secure, comfortable grip when opening drawers and doors.
  • Zinc Base Material: Constructed from zinc for dependable performance on everyday kitchen and bathroom cabinetry.
  • Rustic Siena Style: Part of the Siena collection, finished in a rustic style that complements traditional and transitional cabinetry designs.
  • Thread / Screw Size: 8/32 thread x 1 for standard cabinet pull mounting applications.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 8-3/4"
  • Product Dimension: 5/8"
  • Product Projection: 1-3/8"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodeling Projects
  • Custom Furniture and Millwork
  • Multi-Family Housing Developments
  • Builder and Designer Specification Projects

Why Schaub Siena?

Schaub Siena cabinet hardware is built from zinc for dependable daily performance, with a rustic style designed to complement a range of cabinetry looks. The 8" center to center spacing, 8-3/4" overall length, and 1-3/8" projection combine for a comfortable, functional pull suited to kitchens, bathrooms, and other cabinetry throughout the home.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Siena
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 thread x 1
Overall:
8-3/4"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-3/8"
Product Style:
Rustic
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 256-ABZ – Frequently Asked Questions

1) Will a Schaub 256 Siena pull fit my existing cabinet door holes at 8 inch centers?
The Schaub 256 Siena pull is drilled on 8 inch center-to-center spacing, so it drops onto an existing pair of holes bored 8 inches apart. Overall length is 8-3/4 inches, meaning it only overhangs about 3/8 of an inch past each hole, so it will not cover the marks left by a wider pull. If your current holes are anything other than 8 inch centers, this is not a drop-in swap.
2) What screws does the Schaub 256 Siena cabinet pull take, and will they work on a thicker drawer front?
The Siena 256 uses 8/32 thread screws at 1 inch length. That 1 inch screw is sized for a standard 3/4 inch cabinet door or drawer front with a little thread left for the post. On a thicker applied front, a five piece drawer face, or anywhere you are stacking a face frame or a slab overlay, you will need longer 8/32 machine screws.
3) I want a solid brass cabinet pull rather than a zinc one - what are my options?
The Schaub 256 Siena pull uses a zinc base material with a 1-3/8 inch projection. If the specification calls for forged solid brass, the Omnia modern cabinet pulls are built that way: the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection, the Omnia 1970 carries a 1-1/4 inch projection, and the Omnia 1968/102 is a 4 inch center to center pull. The Deltana SBP35 modern square bar pull is also solid brass, in a 3-1/2 inch size. Those run tighter to the door face than the 256's 1-3/8 inch projection, which matters where fingers need clearance behind the pull.
4) What is a comparable cabinet pull to the Schaub 256 Siena if I want to stay in the same styling family?
The Schaub 256 is a rustic-style cabinet pull from the Siena collection with 8 inch center to center spacing and a zinc base material. If you want to stay close to Schaub's own design language, Emtek builds a Schaub Collection of cabinet pulls, including the Emtek 8405 Select cabinet pulls and the Emtek Alexander cabinet pull, both catalogued as cabinet knob/pull hardware. Those give you Schaub-derived styling from a different manufacturer while the 256 keeps the Siena rustic profile.
5) My cabinet doors are already drilled at 3 or 4 inch centers - what pull should I use instead of the Schaub 256?
The Schaub 256 Siena pull is drilled at 8 inch center to center with an 8-3/4 inch overall length, so it will not drop into a 3 or 4 inch hole pattern. For those existing bores, the Trimco 553 series drawer pulls are 3 inch center to center, the Trimco 562 series offers 3-1/2 inch, 4 inch and 96mm center to center options, the Deltana SBP35 modern square bar pull is 3-1/2 inch, and the Omnia 1968/102 modern cabinet pull is 4 inch center to center in forged solid brass. Matching the existing centers avoids redrilling the door or drawer face.
6) How far does the Schaub Siena pull stand off the cabinet face, and is there enough hand clearance?
Projection is 1-3/8 inches from the face of the door, with a 5/8 inch base dimension where the posts meet the cabinet. That 1-3/8 inch standoff gives a full grip for a gloved hand, which is why it works on heavy drawer banks and tall pantry doors. It also means the pull sits proud in a tight galley or beside an appliance panel, so check swing clearance against anything adjacent.
7) What finishes does the Schaub 256 Siena pull come in?
Two finishes on the Siena 256: Ancient Bronze (ABZ) and Vibra Nickel (VN). Ancient Bronze is the dark rustic option that suits the Siena styling; Vibra Nickel is the brushed silver tone. If you are standardizing a unit or a whole floor of cabinetry, order the run in one finish code, because bronze finishes vary between production batches.
8) Can I mix the Schaub 256 with cabinet knobs on the same run of cabinetry?
Yes, and it is a common approach on a kitchen or millwork package: the Schaub 256 is a two-hole cabinet pull at 8 inch center to center, typically used on drawers and larger doors, while single-hole knobs handle the smaller doors. Orca Hardware's Bachelor Collection offers the CK-15030 round cabinet knob and the CK-16030 round ring cabinet knob, both 1-1/4 inch diameter, and the Blackcomb Collection CK-17025 square cabinet knob at 25mm diameter. Knobs use one bore rather than the paired 8 inch layout the 256 requires, so plan the drilling per door.
9) The Schaub 256 comes in Ancient Bronze and Vibra Nickel - what if I need a satin nickel pull to match existing hardware?
The Schaub 256 Siena pull is offered in Ancient Bronze (ABZ) and Vibra Nickel (VN). Where the job calls for satin nickel specifically, the Orca Hardware CK-12001 T-pull bar is a steel pull supplied in satin nickel. Bronze and nickel tones will not blend on the same elevation, so pick one family across the run and let the 256's Ancient Bronze carry the warmer rustic scheme or Vibra Nickel the cooler one.
10) I need a heavy-duty pull for high-traffic cabinetry - how does the Schaub 256 compare to the Deltana SBP35?
The Schaub 256 is a zinc-bodied Siena pull spanning 8-3/4 inches overall at 8 inch centers, so the load spreads across two widely spaced fasteners using 8/32 by 1 inch screws. The Deltana SBP35 modern square bar pull is described as heavy-duty solid brass at 3-1/2 inches, a shorter grip on tighter centers. For long drawer fronts in a commercial or multi-family kitchen the 8 inch span of the 256 gives a full-hand grip; for small doors and tight faces the 3-1/2 inch SBP35 is the fit.
11) Will the Schaub 256 work as an appliance pull on a refrigerator or dishwasher panel?
On a custom wood panel, yes, provided the panel is bored on 8 inch centers and you supply the right screw length. The Siena 256 ships for 8/32 thread at 1 inch, which suits a nominal 3/4 inch panel; thicker built-up appliance panels need longer 8/32 screws. It will not mount to a factory stainless appliance door, which uses the manufacturer's own handle mounting.
12) Difference between the Schaub Siena 256 and a modern square or round bar pull?
Different design intent. The Siena 256 is a rustic-style pull with a shaped, textured body on a 5/8 inch base, projecting 1-3/8 inches. A bar pull like the Deltana SBP35 modern square bar or the Orca CK-12001 T-pull bar, 2 inch bar width, is a plain geometric tube or bar with no surface texture. Pick the Siena for a rustic, farmhouse, or transitional cabinet program; pick a bar pull for a flat-slab modern one.
13) What is the difference between the Schaub 256 Siena pull and the Emtek Art Deco or Bar cabinet pulls?
All three are cabinet pulls, but they are drawn from different design programs. The Schaub 256 belongs to the Siena collection and is a rustic-style pull with a 1-3/8 inch projection and 5/8 inch base dimension. The Emtek Art Deco cabinet pull and the Emtek Bar cabinet pull are both Schaub Collection pieces from Emtek, catalogued as cabinet knob/pull hardware in the Art Deco and Bar series respectively. Choose by the room's design intent: Siena for a rustic elevation, Art Deco or Bar where a period or linear profile is wanted.
How fast can I get the Schaub 256-ABZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 256-ABZ come with a warranty?
Absolutely. The Schaub 256-ABZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 256-ABZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 256-ABZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!