Schaub 1202 Modo Collection 6"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$92.00
$57.43
Schaub 1202 6" Center to Center Modo Cabinet Pulls Schaub 1202

Schaub 1202 Modo Collection 6" Center to Center Cabinet Pull with 1-3/8" Projection

(No reviews yet) Write a Review

Model: 1202-SSB
From the MODO Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$92.00
$57.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub Modo Collection 6" Center to Center Cabinet Pull

Schaub's Modo Collection cabinet pull brings contemporary style to kitchen and bath cabinetry, finished in a warm Signature Satin Brass. Cast from durable zinc and aluminum, this pull offers a 6" center to center hole spacing, a 1-3/8" projection, a 4-5/8" base dimension, and an overall length of 10-7/8". Mounting hardware includes 2 break-off screws sized M4x45 for a clean fit across a range of cabinet and drawer thicknesses.

Key Features

  • Center to Center Spacing: 6" hole spacing fits standard cabinet and drawer drilling patterns for straightforward installation.
  • Overall Length & Base Dimension: Measures 10-7/8" overall with a 4-5/8" base dimension for a substantial, balanced presence on cabinetry.
  • Comfortable Projection: 1-3/8" projection provides ample clearance for a secure, comfortable grip.
  • Durable Zinc & Aluminum Construction: Cast from zinc and aluminum for long-lasting strength and everyday resistance to wear in kitchen and bath environments.
  • Signature Satin Brass Finish: Warm, contemporary Signature Satin Brass finish complements the clean lines of the Modo Collection.
  • Modo Collection Design: Contemporary styling from Schaub's Modo Collection suits modern kitchen, bath, and cabinetry projects.
  • Mounting Hardware Included: Ships with 2 break-off screws sized M4x45, allowing installers to trim screws to the exact cabinet or drawer thickness.

Certifications & Compliance

  • California Proposition 65 Warning applicable per manufacturer product stewardship documentation.

Technical Specifications

  • Product Group: Cabinet Hardware
  • MAP Policy: Yes
  • Overall: 10-7/8"
  • Product Dimension: 4-5/8"
  • Product Projection: 1-3/8"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 6"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodels
  • Custom Cabinetry Projects
  • Furniture and Millwork
  • Multi-Family Residential Properties
  • Commercial Design Projects

Why Schaub Modo?

Schaub's Modo Collection pairs a zinc and aluminum construction with a refined Signature Satin Brass finish for a pull that looks as good as it performs. Contemporary lines and precise 6" center to center spacing make it easy to coordinate across kitchen, bath, and cabinetry projects that call for dependable, well-made hardware.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
MODO
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
10-7/8"
Thread / Screw Size:
2 X Break-Off Screws M4x45
Product Function:
Cabinet Pull
Product Dimension:
4-5/8"
Product Projection:
1-3/8"
Product Style:
Contemporary
Product Material:
Zinc & Aluminum
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
6"
Department:
Door Hardware

Schaub 1202-SSB – Frequently Asked Questions

1) Will the Schaub 1202 Modo pull fit my existing 6 inch cabinet hole spacing?
Yes. The Modo 1202 pull is drilled at 6 inch center to center, so it drops onto an existing pair of holes bored 6 inches apart with no new drilling. Overall length is 10-7/8 inches, so make sure you have that much clear face on the drawer or door front before you commit.
2) What screws come with the Schaub Modo 1202 cabinet pull, and do they work on thick drawer fronts?
Two M4 x 45 break-off screws ship with each pull. The break-off design lets the installer snap the screw to the exact thickness of the door or drawer front, so one screw covers thin slab fronts and thicker built-up or five-piece fronts without ordering separate lengths. M4 is the standard cabinet hardware thread, so replacements are easy to source.
3) How much hand clearance does the Schaub 1202 pull give in front of the cabinet face?
Projection is 1-3/8 inches off the face, which is enough to get a full hand behind the bar rather than fingertips only. That matters on heavy pot drawers and on inset doors where you want knuckle clearance. If you have a tight galley walkway or an appliance panel next to a wall, the slimmer Omnia 1970 at 1-1/4 inch projection or the Omnia 1969 at 1-3/16 inch sit closer to the face.
4) What is a solid brass alternative to the Schaub 1202 Modo cabinet pull?
The Schaub 1202 Modo pull is cast from zinc and aluminum. If the specification calls for solid brass instead, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. Note the hole spacing difference: the Schaub 1202 drills at 6 inch center-to-center, so moving to the Omnia 1968/102 at 4 inch means a different drilling pattern on the door or drawer front.
5) I need a shorter pull than the Schaub 1202 for small drawers. What should I use?
The Schaub 1202 Modo runs 10-7/8 inch overall on 6 inch center-to-center spacing, which is sized for wide drawers and tall doors. For small drawers, the Trimco 553 series drawer pulls are 3 inch center-to-center, and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Deltana SBP35 modern square bar pull is a 3-1/2 inch heavy-duty solid brass option in the same short range.
6) What looks like a substitute for the Schaub 1202 but will not work in the same holes?
Knobs are the common mistake. The Orca Hardware CK-15030 and CK-16030 Bachelor collection round knobs are 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob is 25mm, all single-screw cabinet knobs. The Schaub 1202 Modo mounts on a two-hole 6 inch center-to-center pattern with two M4x45 break-off screws, so a knob leaves an open hole in a door already drilled for it.
7) Is a 6 inch center to center pull too big for upper cabinet doors?
At 10-7/8 inches overall, the 1202 is sized for wide drawer banks, pantry doors, and appliance panels more than for narrow upper doors. A common approach is to run the 6 inch Modo on the drawers and a knob on the uppers. For the knob side, the Orca Bachelor round knob at 1-1/4 inch diameter or the Blackcomb 25mm square knob are the smaller-scale options.
8) Can I match the Schaub Modo pull across a whole kitchen or a multi-unit job?
The Modo is a Schaub collection, so it is specified as a family rather than a one-off, and all four finishes carry the same 6 inch center to center drilling. For a property manager or builder standardizing a fleet of units, that means one drill jig and one finish spec across the drawer fronts. Emtek also carries Schaub-designed collections, including the Emtek SELECT 8405 and the Bar cabinet pull, if you need to extend the same design language to other sizes or shapes.
9) Which pull has a projection closest to the Schaub 1202 Modo?
The Schaub 1202 Modo projects 1-3/8 inch off the face of the cabinet. The closest projections among modern pulls are the Omnia 1970 at 1-1/4 inch and the Omnia 1969 and Omnia 1971 at 1-3/16 inch each. All three sit slightly tighter to the door than the Schaub, which matters where a pull is near an adjacent appliance, a wall return, or a drawer that swings past a corner.
10) For a commercial or multi-family job, what steel pull compares to the Schaub 1202 Modo?
The Schaub 1202 Modo is a contemporary zinc and aluminum pull offered in Gun Metal, Matte Black, Polished Rose Gold, and Signature Satin Brass. Where a job calls for steel instead, the Orca Hardware CK-12001 T-pull bar is steel in satin nickel with a 2 inch bar width. That changes both the material and the look, so it suits turnover and back-of-house cabinetry more than a design-led kitchen package.
11) What is the 4-5/8 inch dimension listed on the Schaub 1202 pull?
That is the base dimension of the pull, separate from the 10-7/8 inch overall length and the 1-3/8 inch projection. It tells you how much of the pull's footprint sits against the cabinet face, which is what you check against stile width on a face-frame door or against a narrow shaker rail.
12) Is the Schaub 1202 a contemporary or traditional style pull?
Contemporary. The Modo 1202 is clean-lined modern hardware for current kitchen and bath work. If the job is period or traditional, the Emtek Art Deco cabinet pull or the Emtek Alexander pull are the decorative-style alternatives.
How fast can I get the Schaub 1202-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 1202-SSB come with a warranty?
Absolutely. The Schaub 1202-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 1202-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 1202-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!