Schaub 992-6 6" Center to Center Cabinet Pull

Yes. The Schaub 992-6 is a 6 inch center-to-center pull, so it lands directly on an existing 6 inch hole pattern with no redrilling. Overall length is 7 inches, which leaves about a half inch of pull beyond each screw hole, so check you have that much clear rail or drawer face on either side.

The Schaub 992-6 is a solid brass cabinet pull in the Symphony Inlays style, offered with Imperial Shell, Mother of Pearl, or Tiger Penshell inlay. For a plain metal look with no inlay, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch. Both are unadorned bar-style pulls, so the drawer face would need the different hole spacing drilled rather than reusing the 6 inch centers of the 992-6.

The Schaub 992-6 needs 6 inch center-to-center spacing and measures 7 inches overall, which is more than a narrow drawer face will carry. For shorter spacing, the Trimco 553 Series drawer pull is 3 inch center-to-center and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center. The Omnia 1968/102 at 4 inch center-to-center is another shorter option in forged solid brass.

It uses 8/32 machine screws, the standard cabinet hardware thread. Thicker slab fronts or drawers with an applied face usually need longer 8/32 screws than what ships in the bag, so measure your front thickness and add the screw length you need.

Projection is 1/16 inch and the base measures 5/8 inch. That is a very low-profile pull, so it will not catch a hip or an apron in a tight galley or a narrow hallway of cabinets. If you want a finger-clearance bar pull instead, something like the Omnia 1970 carries a 1-1/4 inch projection.

The body is solid brass. The 992-6 belongs to Schaub's Symphony Inlays style, and the face is inlaid with natural shell: Imperial Shell, Mother of Pearl, or Tiger Penshell depending on which one you order. Because the inlay is a natural material, expect shell-to-shell variation in figure and color between pieces.

Three combinations: Polished Nickel with Imperial Shell, Polished Nickel with Mother of Pearl, and Estate Dover with Penshell. The two nickel versions share the same metal finish, so mixing them across a kitchen reads as one hardware suite with two different shell faces.

The Schaub 992-6 is a decorative solid brass pull with shell and mother of pearl inlays, which suits residential and hospitality millwork. For heavier utility use, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Those give a plain wipe-down face without an inlay surface.

Emtek carries a Schaub Collection of cabinet pulls, including the Emtek 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull. Those are the closest brand-family counterparts to the Schaub 992-6, which is a Symphony Inlays cabinet pull in solid brass. The Emtek Schaub Collection pieces are decorative cabinet knob/pull designs rather than inlay pulls, so use them where you want the same brand lineage but a different face treatment.

The 992-6 covers the 6 inch spacing typically used on wide drawers and appliance-adjacent fronts. For the upper doors and narrow drawers you will want shorter centers or knobs in the same design family. Emtek sells the Schaub Collection under its own numbers, including the Emtek 8405 Select cabinet knobs and pulls, which is where to look for a coordinating piece in a smaller size.