Schaub 209 Northport Cabinet P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$62.00
$35.90
Schaub 209 12" Center to Center Northport Cabinet Pull Schaub 209

Schaub 209 Northport Cabinet Pull, 12" Center to Center, 1-1/2" Projection, Zinc

(No reviews yet) Write a Review

Model: 209-ABZ
From the Northport Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$62.00
$35.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 209 Northport Cabinet Pull, 12" Center to Center, 1-1/2" Projection, Zinc

Schaub presents the 209 Northport Cabinet Pull, a transitional style cabinet pull measuring 12" center to center with a 13" overall length and 1-1/2" projection from the mounting surface. Constructed from zinc with a 1" base dimension, this pull is designed for secure, long lasting installation on kitchen and bathroom cabinetry. Part of the Northport collection, it pairs clean lines with versatile styling suited to a range of cabinetry designs.

Key Features

  • Center to Center Spacing: Measures 12" center to center for precise, standard mounting alignment.
  • Overall Length: Spans 13" overall with a 1" base dimension for a stable mounting footprint.
  • Projection: Extends 1-1/2" from the door or drawer face for a comfortable, functional grip.
  • Zinc Construction: Made from zinc for dependable, everyday cabinet hardware performance.
  • Northport Collection Style: Features a transitional design from the Northport collection that complements both contemporary and traditional cabinetry.
  • Thread / Screw Size: Sized for 8/32 x 1" screws to ensure proper fit during installation.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 13"
  • Thread / Screw Size: 8/32 x 1"
  • Product Dimension: 1"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 12"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Hospitality Interiors
  • Retail Display Cabinetry

Why Schaub 209?

Schaub 209 Northport cabinet pulls are built from zinc for dependable daily use, with a 12" center to center spacing and 1-1/2" projection engineered for comfortable operation. Designed within the Northport collection's transitional style, this pull delivers a consistent, professional grade fit for cabinetry projects large and small.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Northport
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
13"
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Product Dimension:
1"
Product Projection:
1-1/2"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
12"
Department:
Door Hardware

Schaub 209-ABZ – Frequently Asked Questions

1) What hole spacing do I need to drill for the Schaub 209 Northport pull?
The Northport 209 pull mounts on 12 inch center-to-center holes. Overall length is 13 inches, so you get about a half inch of post beyond each screw hole. On a retrofit, your existing bores have to be exactly 12 inches apart, otherwise you are filling and re-drilling the drawer face.
2) What screws come with the Schaub 209 pull and will they work on a thick drawer front?
It takes 8/32 machine screws, supplied at 1 inch. That covers a standard 3/4 inch drawer face with thread to spare. If you are going through a thicker slab front, a false front plus box front, or an applied panel, you will need longer 8/32 screws.
3) What is a comparable solid brass alternative to the Schaub 209 Northport pull for a kitchen where the specifier wants forged brass instead of zinc?
The Schaub 209 Northport pull is a zinc-base cabinet pull with a 1-1/2 inch projection. If forged solid brass is required, the Omnia 1969 Modern Cabinet Pull is forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 Modern Cabinet Pull is forged solid brass with a 1-1/4 inch projection. Both sit closer to the door face than the Northport, so verify knuckle clearance in front of appliance and drawer faces before switching.
4) The Schaub 209 at 12 inch center to center is too long for my 15 inch drawers. What shorter pulls can I use to keep the same look?
The Schaub 209 Northport is fixed at 12 inch center to center with a 13 inch overall length, which suits wide drawers and appliance panels. For narrower drawer fronts, the Omnia 1968/102 Modern Cabinet Pull is a 4 inch center-to-center pull, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch and 96mm center-to-center, and the Trimco 553 Series drawer pull is 3 inch center to center. Mixing a short pull on drawers with the 209 on tall doors is a common way to hold one program across a run.
5) How far does the Schaub Northport 209 pull stand off the drawer front?
Projection is 1-1/2 inches, with a 1 inch base dimension at the mounting posts. That is a deep enough grip for a loaded 12 inch or wider drawer, but check clearance if the cabinet sits in a tight walkway or next to a door swing.
6) What is the Schaub 209 Northport pull made of?
Zinc base material with a plated or coated finish over it. That is a cast part, not a solid brass extrusion. If your spec calls for solid brass, the Omnia 1968, 1969, 1970 and 1971 cabinet pulls and the Deltana SBP35 square bar pull are forged or solid brass alternatives ZenSupply carries.
7) What should I use instead of the Schaub 209 Northport pull if the design calls for a squared modern bar rather than a transitional profile?
The Schaub 209 Northport is a transitional-style pull. For a squared modern look, the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass square bar at 3-1/2 inch, the Omnia 1971 Modern Cabinet Pull is forged solid brass with a 1-3/16 inch projection, and the Orca Hardware CK-12001 T-Pull Bar is a steel bar pull with a 2 inch bar width in satin nickel. Each is a different mounting footprint from the 209's 12 inch center to center, so redrill or template accordingly.
8) Can I use a cabinet knob in place of the Schaub 209 Northport pull on my cabinet doors?
A knob is a single-hole part and will not drop into the two-hole pattern of the Schaub 209, which is drilled 12 inch center to center for 8/32 x 1 inch screws. If a knob is acceptable for the doors, the Orca Hardware Bachelor Collection round cabinet knob is 1-1/4 inch diameter, the Bachelor Collection round ring knob is also 1-1/4 inch diameter, and the Blackcomb Collection square knob is 25mm. A common approach is knobs on doors and the 209 pull on wide drawers and appliance panels.
9) Will the Northport pull match other Schaub hardware in the same kitchen?
Northport is a transitional-style collection, so it sits comfortably with both shaker and slab fronts. Schaub hardware is also sold through Emtek's Schaub Collection, which includes the Emtek 8405 Select, Alexander, Art Deco and Bar cabinet pulls, if you need knobs or other profiles in a coordinating line.
10) I need a long appliance-style bar pull in steel instead of zinc. What else is there?
For a steel bar pull, the Orca Hardware CK-12001 T-Pull Bar is a 2 inch bar width steel pull in satin nickel. It is a different look from the Northport, which is a transitional zinc pull with a 1-1/2 inch projection, so pick based on whether you want a plain round bar or a shaped transitional profile.
11) Can I use the Schaub 209 on cabinet doors, not just drawers?
Yes, it is a cabinet pull and mounts the same way on a door stile as on a drawer face, as long as the stile is wide enough to take the 1 inch base and the screw post without crowding the panel edge. On a tall pantry or appliance door it mounts vertically on 12 inch centers.
How fast can I get the Schaub 209-ABZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 209-ABZ come with a warranty?
Absolutely. The Schaub 209-ABZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 209-ABZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 209-ABZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!