Schaub 211038 300mm Center to Center Suave Cabinet Pull

Mounting is M4 metric thread. Standard North American cabinet hardware uses 8-32 machine screws, which will not thread into an M4 post, so reuse the metric screws supplied with the pull rather than whatever came out of the door. If you are replacing pulls on thicker drawer fronts or doors with applied panels, you will need longer M4 screws to make up the added thickness.

The Schaub 211038 Suave pull is built from zinc and aluminum. If the specification calls for solid brass, the Omnia 1969 modern cabinet pull is forged solid brass and carries a 1-3/16 inch projection, close to the 1 inch projection of the Suave. The Omnia 1970 is also forged solid brass with a 1-1/4 inch projection. Both are modern-styled bar pulls, so the visual direction stays similar to the contemporary Suave, but they are separate series with their own center-to-center offerings, so confirm the drilling matches your existing bore before ordering.

The Schaub 211038 Suave pull is a long pull at 300 mm center to center and 11-3/4 inches overall, sized for tall doors and wide drawer fronts. For small drawers, the Trimco 553 series drawer pulls are 3 inch center to center, and the Trimco 562 series is offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center options. The Deltana SBP35 modern square bar pull is a 3-1/2 inch heavy-duty solid brass pull. Any of those will bore into a narrow drawer front where the 300 mm spacing will not fit.

Projection is 1 inch off the face of the door or drawer, which is the grip depth you get behind the bar. The bar itself measures 3/8 inch, so it is a slim profile with a full inch of knuckle room. In a galley kitchen or a tight island run, that 1 inch projection is worth checking against opposing cabinet faces before you commit to a long 11-3/4 inch pull.

No. The Suave pull is zinc and aluminum, not solid brass. At 11-3/4 inches overall that keeps the weight down on tall door fronts, but if your spec calls for forged solid brass, look at the Omnia 1968/102 or the Deltana SBP35 Modern Square Bar Pull instead, both of which are solid brass bar pulls.

Model 211038 is the 300 mm center to center length specifically. Schaub builds the Suave collection in a run of lengths, so for drawers and doors that need shorter spacing you order the matching Suave model at that center to center rather than a different size of 211038. Keeping everything in Suave keeps the 3/8 inch bar profile and 1 inch projection consistent across the run.

Emtek lists several cabinet pull families under its Schaub Collection, including the Emtek 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull. The Emtek Bar cabinet pull is the nearest in character to the contemporary Suave 211038, while Alexander and Art Deco are their own distinct design series. The Emtek families are catalogued as cabinet knob/pull, so they cover both knobs and pulls if you want knobs on upper doors and the 300 mm Suave on tall pantry fronts. Verify center-to-center spacing on each Emtek series against your drilling before you commit.

No. The Orca Hardware CK-15030 Bachelor Collection piece is a round cabinet knob, 1-1/4 inch diameter, and mounts on a single hole. The Schaub 211038 Suave is a two-hole pull at 300 mm center to center with M4 screws. The same applies to the Orca CK-16030 round ring knob and the CK-17025 Blackcomb square knob, both knobs rather than pulls. If you need a bar-style pull from Orca instead, the CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel.

The Schaub 211038 Suave pull is offered in Polished Chrome, Nickel Silk, Gold Rande, Matte Black, and Matte White, so painted matte finishes come straight off the same part. The Omnia modern cabinet pulls, including the 1968/102 at 4 inch center to center, the 1969, the 1970, and the 1971, are forged solid brass series in the modern styling family. If the design intent is a matte white or matte black long pull, the Suave covers it in one order; if the intent is a brass-bodied pull at a shorter 4 inch spacing, the Omnia 1968/102 is the direct route.

Five finishes: Polished Chrome, Nickel Silk, Gold Rande, Matte Black, and Matte White. Matte White is the unusual one here and is worth noting if you are matching a painted slab kitchen; most pull lines in this size stop at the metal tones.

Same design house, different line. The Suave 211038 is a contemporary bar pull in zinc and aluminum on 300 mm centers. Emtek sells Schaub-designed cabinet hardware under its own SELECT program, including the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pulls. If you are matching an Emtek cabinet package already in the house, pick from that Schaub Collection range; if you are specifying Schaub direct, the Suave is the contemporary slim-bar option.

Yes, Schaub publishes a Proposition 65 warning for this pull under its product stewardship notice. For a California multifamily or commercial fit-out where submittals require the warning on record, flag it in your package alongside the zinc and aluminum material callout.

No. The SDC SP50 is a 50mm spindle used in door controls, not a cabinet pull at all. The Schaub 211038 Suave is a cabinet pull with a 300 mm center-to-center mount and M4 screws for cabinet doors and drawer fronts. If you need a long contemporary cabinet pull, stay with the Suave or look at the Emtek Bar cabinet pull from the Schaub Collection.