Schaub 211045 8" Center to Cen...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$64.00
$42.12
Schaub 211045 8" Center to Center Aspero Cabinet Pull

Schaub 211045 8" Center to Center Aspero Cabinet Pull in Zinc and Aluminum

(No reviews yet) Write a Review

Model: 211045-BN
From the Aspero Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$64.00
$42.12
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 211045 8" Center to Center Aspero Cabinet Pull in Zinc and Aluminum

The Schaub 211045 8" Center to Center Aspero Cabinet Pull brings clean contemporary styling to kitchen and bath cabinetry. Built with a Zinc and Aluminum base material, this pull offers an 8" center to center spacing, a 1-3/8" projection, and a 9-1/4" overall length for comfortable everyday use. As part of the Aspero collection, it pairs simple contemporary lines with reliable construction suited to residential and light commercial cabinetry projects.

Key Features

  • Center to Center: Features 8" center to center hole spacing, making installation straightforward on standard cabinet doors and drawers.
  • Overall Length: Measures 9-1/4" overall, providing a substantial grip length for everyday cabinet and drawer use.
  • Projection: Extends 1-3/8" from the mounting surface, offering comfortable hand clearance for daily operation.
  • Base Dimensions: A 3/4" base dimension creates a clean, proportional mounting footprint at each end.
  • Base Material: Constructed of Zinc and Aluminum for a durable pull that stands up to everyday cabinet use.
  • Contemporary Style: Part of the Aspero collection, bringing clean, contemporary lines to modern kitchen and bath cabinetry.
  • Thread / Screw Size: M4 thread size for compatible mounting hardware during installation.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents; refer to manufacturer documentation for details.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 9-1/4"
  • Thread / Screw Size: M4
  • Product Dimension: 3/4"
  • Product Projection: 1-3/8"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Cabinetry Installations
  • Builder and Contractor Projects
  • Interior Design Applications

Why Schaub Aspero?

Schaub Aspero cabinet pulls combine a Zinc and Aluminum base material with clean contemporary lines for dependable everyday performance. With precise 8" center to center spacing and a comfortable 1-3/8" projection, these pulls are engineered to deliver consistent fit and function across cabinetry and furniture applications.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Aspero
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
9-1/4"
Thread / Screw Size:
M4
Product Function:
Cabinet Pull
Product Dimension:
3/4"
Product Projection:
1-3/8"
Product Style:
Contemporary
Product Material:
Zinc and Aluminum
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 211045-BN – Frequently Asked Questions

1) What screw size does the Aspero cabinet pull take, and will it work on a thick drawer front?
The Aspero 211045 uses M4 metric machine screws, not the 8-32 standard common on older North American cabinets. If you are reusing screws from a previous pull, confirm they are M4 before installing. Thicker fronts or slab doors with applied panels may need longer M4 screws than the standard length supplied.
2) What are the alternatives to the Schaub 211045 Aspero pull if I need a solid brass pull instead of zinc and aluminum?
The Schaub 211045 Aspero cabinet pull is built from zinc and aluminum. If the specification calls for solid brass, the Omnia 1969, 1970 and 1971 modern cabinet pulls are all forged solid brass, and the Deltana SBP35 modern square bar pull is solid brass in a 3-1/2 inch size. Note that the Omnia and Deltana pulls are their own designs and sizes, so the 8 inch center-to-center spacing of the 211045 would need to be re-drilled or matched separately.
3) I need a shorter pull than 8 inch center to center for narrow drawers - what should I use?
The Schaub 211045 Aspero pull is drilled at 8 inch center-to-center with a 9-1/4 inch overall length, which is long for a narrow drawer front. For shorter hole spacing, the Omnia 1968/102 is a modern cabinet pull with 4 inch center-to-center spacing, the Trimco 553 series drawer pulls are 3 inch center-to-center, and the Trimco 562 series is offered in 3-1/2 inch, 4 inch and 96mm center-to-center options. The Deltana SBP35 square bar pull is a 3-1/2 inch pull.
4) How far does the Schaub Aspero pull stand off the cabinet face?
Projection is 1-3/8 inches, with a 3/4 inch base dimension where it meets the cabinet face. That gives enough hand clearance for a full grip, which matters on an 8 inch pull used on a heavy drawer or a tall pantry door. In a tight galley or where a door swings past an adjacent appliance handle, measure that 1-3/8 inches into your clearance.
5) I need a matching shorter pull for drawers. What are my options alongside the 8 inch Aspero?
The 211045 is the 8 inch center-to-center size, sized for large drawers and tall doors. For smaller drawers in the same run, Emtek carries the Schaub Collection as Emtek SELECT cabinet pulls and the Schaub Collection Bar pull, which keeps you inside the same design family. If you only need a short drawer pull and finish matching is not critical, the Trimco 553 Series runs 3 inch centers and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm centers.
6) Can I use a knob instead of the Schaub 211045 Aspero pull on the same doors?
A knob is a single-hole part, while the Schaub 211045 Aspero is a two-hole pull on 8 inch centers, so swapping to a knob leaves one of the existing bores exposed. If you are starting fresh and want knobs, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob and CK-16030 round ring cabinet knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection knob is a 25mm square. All three are cabinet knobs rather than pulls.
7) How does the Schaub Aspero 211045 compare to the Emtek Schaub Collection pulls?
The 211045 belongs to Schaub's Aspero collection, a contemporary-style cabinet pull. Emtek carries several Schaub Collection cabinet pull lines with different design vocabularies: the Emtek 8405 Select series, the Alexander series, the Art Deco series, and the Bar series, each catalogued as a cabinet knob/pull. If you want the same contemporary bar-style look in a different family, the Emtek Bar cabinet pull is the closest in intent; the Art Deco and Alexander series read as period designs.
8) Is the Orca CK-12001 T-pull bar a substitute for the Schaub 211045 Aspero pull?
They are not interchangeable. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, while the Schaub 211045 Aspero is a zinc and aluminum pull on 8 inch centers with a 1-3/8 inch projection and M4 screws, offered in brushed nickel, gold rande, matte black and matte white. Use the CK-12001 where a short T-style bar suits the front; it will not drop into the 8 inch bore pattern.
9) Is this Schaub pull contemporary enough for flat slab cabinet fronts, or is it a traditional look?
Contemporary. The Aspero collection is a clean bar style pull, which is why it reads correctly on flat slab and shaker fronts. If the job is traditional or period, the Emtek Art Deco and Alexander pulls from the Schaub Collection are the styled alternatives.
10) Can I use this 8 inch pull as an appliance pull on a refrigerator or dishwasher panel?
At 8 inch centers with a 1-3/8 inch projection, the Aspero 211045 is long enough for an integrated appliance panel, but it is a cabinet pull in zinc and aluminum with M4 screws, and appliance panels usually come with their own predrilled spacing and hardware. Match the panel's hole spacing to 8 inches and confirm M4 threads fit the panel's mounting holes before committing.
How fast can I get the Schaub 211045-BN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 211045-BN come with a warranty?
Absolutely. The Schaub 211045-BN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 211045-BN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 211045-BN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!