Schaub 64-8 Cabriole Cabinet P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$23.00
$18.40
Schaub 64-8 Cabriole 8" Center to Center Cabinet Pull

Schaub 64-8 Cabriole Cabinet Pull, 8" Center to Center, Zinc

(No reviews yet) Write a Review

Model: 64-8-PN
From the Cabriole Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$23.00
$18.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 64-8 Cabriole Cabinet Pull, 8" Center to Center, Zinc

The Schaub 64-8 Cabriole Cabinet Pull brings traditional style detailing to kitchen and bathroom cabinetry with an 8" center to center mounting span and a 9-1/2" overall length. Finished with a zinc base material, this pull offers a 1-5/8" projection for a comfortable, secure grip, and its 1/2" base dimension keeps the profile proportional on cabinet doors and drawers. Part of the Cabriole collection, this cabinet pull pairs classic lines with practical, everyday durability suited to residential cabinetry projects.

Key Features

  • Center to Center Spacing: 8" center to center mounting holes allow straightforward installation on standard cabinet drawers and doors.
  • Overall Length: 9-1/2" overall length provides a substantial, easy to grip pull surface.
  • Projection: 1-5/8" projection creates comfortable clearance between the pull and the cabinet surface.
  • Base Dimensions: 1/2" base dimension keeps the mounting posts proportional to the overall pull design.
  • Base Material: Zinc construction supports daily use in kitchen and bath cabinetry.
  • Thread / Screw Size: 8/32 mounting posts for compatibility with standard cabinet hardware installations.
  • Cabriole Collection: Traditional style detailing designed to complement classic cabinetry and furniture.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 8/32"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Cabinetry Installations
  • Closet and Storage Systems

Why Schaub 64-8?

Schaub Cabriole cabinet pulls combine a zinc base material with traditional style detailing for dependable, everyday performance on cabinets and drawers. The 8" center to center spacing and 9-1/2" overall length make this pull a straightforward, proportionate upgrade for kitchen and bath cabinetry, while the 1-5/8" projection keeps the grip comfortable for repeated daily use.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Cabriole
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32"
Overall:
9-1/2"
Product Function:
Cabinet Pull
Product Dimension:
1/2"
Product Projection:
1-5/8"
Product Style:
Traditional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 64-8-PN – Frequently Asked Questions

1) What is a modern-styled alternative to the Schaub 64-8 Cabriole pull for the same cabinetry run?
The Schaub 64-8 Cabriole is a traditional-style cabinet pull in zinc with an 8 inch center-to-center spacing. If the design calls for a contemporary profile instead, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 is a modern forged solid brass pull with a 1-1/4 inch projection against the Cabriole's 1-5/8 inch projection. Both Omnia options are a shorter mounting span, so existing 8 inch bores would need new drilling or a backplate.
2) Is there a solid brass pull to use instead of the zinc Schaub Cabriole?
Yes. The Schaub 64-8 Cabriole is built on a zinc base material. If a specification calls for solid brass, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches, and the Omnia 1969 and Omnia 1971 are forged solid brass cabinet pulls, each with a 1-3/16 inch projection. All three are modern bar-style profiles rather than the Cabriole's traditional shape.
3) What should I use on small drawers where the 8 inch Cabriole pull is too long?
The Schaub 64-8 Cabriole measures 9-1/2 inches overall on an 8 inch center-to-center span, which overruns narrow drawer fronts. For short spans, the Trimco 553 Series drawer pull is 3 inch center-to-center and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Deltana SBP35 square bar pull is another 3-1/2 inch option.
4) How far does the Schaub 64-8 Cabriole pull stand off the drawer front?
Projection is 1-5/8 inches from the face of the door or drawer, with a 1/2 inch base where it lands on the surface. That is a fairly deep grip, good for gloved hands and heavy drawers, but check clearance where a drawer sits beside a perpendicular wall, a range handle, or an inside corner cabinet.
5) What is the Schaub 64-8 pull made of, and will it hold up in a rental kitchen?
The Cabriole 64-8 is cast zinc. Zinc holds crisp traditional detail and takes plated finishes well, which is how the antique and bronze looks are achieved. For heavy-traffic multi-family kitchens it is a reasonable spec, though if you want a solid brass body instead, the Deltana SBP Series bar pull and the Omnia 1968, 1969, 1970 and 1971 cabinet pulls are forged or solid brass alternatives.
6) I need small 3 inch drawer pulls to go with these on the same job. What works?
The Cabriole 64-8 is only offered at 8 inch center-to-center, so for narrow drawers you need a different part. In the comparable range ZenSupply carries, Trimco 553 Series drawer pulls are 3 inch center-to-center and the Trimco 562 Series covers 3-1/2 inch, 4 inch and 96mm center-to-center. Those are utility drawer pulls rather than traditional decorative ones, so for a visible kitchen run stay within the Cabriole collection at a shorter size.
7) Can a cabinet knob replace the Schaub 64-8 Cabriole pull?
No, not without changing the door prep. The 64-8 Cabriole is a two-post cabinet pull on an 8 inch center-to-center span using 8/32 screws. Single-hole knobs such as the Orca Hardware CK-15030 round knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb square knob at 25mm mount through one bore. Swapping to a knob leaves the second Cabriole hole exposed unless the front is replaced or plugged.
8) Can I use the Emtek Schaub Collection pulls to match the Cabriole on the same job?
Emtek carries a Schaub Collection of cabinet hardware, which includes the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pulls. Those are separate series from the Cabriole collection the 64-8 belongs to, and they are catalogued as cabinet knob/pull items, so a given Emtek piece may be a knob rather than a bored pull. Confirm the center-to-center of the Emtek series you pick before pairing it with the 64-8's 8 inch spacing.
9) What finishes does the Schaub Cabriole 64-8 pull come in?
Four finishes: Antique Nickel (AN), Polished Nickel (PN), Brushed Bronze (BBZ) and Empire Bronze (EBZ). Two nickels and two bronzes, so you can match either a warm or cool scheme across a kitchen without leaving the Cabriole collection.
10) I want a traditional look, not a modern bar pull. Is the Cabriole the right style?
Yes. The Cabriole 64-8 is a traditional styled pull, the curved footed profile that suits inset, raised panel and shaker doors in a period kitchen. The modern square and round bar pulls, such as the Deltana SBP Modern Square Bar Pull and the Omnia 1968, 1969, 1970 and 1971 modern pulls, are the opposite end of that spectrum, straight bar geometry for flat slab fronts.
11) Can I match the Schaub Cabriole pulls with Emtek cabinet hardware elsewhere in the house?
Emtek carries a Schaub Collection of cabinet knobs and pulls, including the Emtek SELECT 8405, Alexander, Art Deco and Bar series. If you are specifying Schaub-styled hardware across a project and need knobs or other profiles, those Emtek Schaub Collection pieces are the related line to look at alongside the Cabriole 64-8.
12) Does the Schaub 64-8 Cabriole pull carry a California Proposition 65 warning?
Yes, a Proposition 65 warning applies for California residents. Schaub publishes the details on its product stewardship page, which the product information links to directly.
13) Is the Orca CK-12001 T-pull bar an equivalent to the Schaub Cabriole pull?
They serve different looks and materials. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, made of steel in satin nickel. The Schaub 64-8 Cabriole is a traditional-profile zinc pull with a 1-5/8 inch projection and 8 inch center-to-center spacing, offered in Antique Nickel, Brushed Bronze, Empire Bronze, and Polished Nickel. Treat the CK-12001 as a utilitarian bar option rather than a visual match.
How fast can I get the Schaub 64-8-PN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 64-8-PN come with a warranty?
Absolutely. The Schaub 64-8-PN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 64-8-PN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 64-8-PN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!